SMC Truck Parts SMC, SMC Auto Parts

 

When composite material be used in commercial vehicles, it will need to meet specific customer's requirements
with composite appearance, aerodynamics, durability and weight reduction. New process improvements, such as
advanced pre-carbon fiber and alternative resin technologies join in, helping to reduce weight and strength.

The performance of composites:
1. Complex structures such as shaped surface
2. Weight reduction (lightweight)
3. Increased Impact strength
4. Excellent corrosion resistance
5. Easy to assemble with its accessories




  Describtion:

1^st:Mould treatment: 
Polish: Mould must be polished before production which will guarantee the good and solidified surface
Clean: Special detergent are used to get the dust away from the mould which will make no dark markings in the
 gel coat surface. 
Release agent: This will be brushed on the mould to make ejection easily.

2^nd Fiberglass and resin:
Gel coat: The color of products is decided by the gel coat,with thickness of about 0.3-0.5mm. UV resistant can
be added. 
Surface mat:  This is to avoid the air bubble on the surface, and also make fiberglass mat invisible from the finished
surface. 
Fiberglass mat: Normally we use 300g/m2 (0.6mm thickness) and 450g/m2 (0.9mm thickness). According to your
requests on the  thickness and strength, we will calculate how many layers of fiberglass mat should be used.


3^rd
Solidify:  The time required for solidifying depends on thickness and weather condition.Normally 24 hours for one
piece to solidify to avoid any deformation after demoulding. 
Demould: After solidified, the product will be demoulded
Cut and trim:  We will mark the trim line and hole positions on the mould,then trim according to the marks to
gaurantee the mounting dimensions



4^{th    Adhesion:  Professional mould and  Temperature   and worker}

5^{th  Â} Surface treatment :

6^{th Â} Painting

7^{th  Package Solution:}
Our principle: Safe and economical  
We choose economical packaging on condition that there will be no
damage during transportation.
Shipping: We are very glad to get the freight cost information for you
as we have long term cooperated forwarder
company.










8^{th     Quality Control of working :}
Technical document
as following                                      Testing  history data







Qingdao Lanmon Industrial Co., Ltd. was established in 2006, is located in Huangdao District of Qingdao
 Yuanjiazhuang community. Covers an area of 11,000 square meters, with registered capital of 10 million yuan.
Specializing in the researching and manufacturing of hand lay-up composite materials (FRP), SMC composite
materials (FRP) BMC composite materials and other products which used in rail transportation,vehicles and other
fields.Our company is a production enterprise integrating R & D, design, manufacture and sales.

We have 10 years experience of FRP complete production process, from moulding to painted end product, and
the quality of our products are well controlled with professional QC engineer. Our products has won the trust 
and favor of customers at home and abroad.
·
Mission: Extensive use of composite materials technology to protect our home environment






 

 

When composite material be used in commercial vehicles, it will need to meet specific customer's requirements
with composite appearance, aerodynamics, durability and weight reduction. New process improvements, such as
advanced pre-carbon fiber and alternative resin technologies join in, helping to reduce weight and strength.

The performance of composites:
1. Complex structures such as shaped surface
2. Weight reduction (lightweight)
3. Increased Impact strength
4. Excellent corrosion resistance
5. Easy to assemble with its accessories




  Describtion:

1^st:Mould treatment: 
Polish: Mould must be polished before production which will guarantee the good and solidified surface
Clean: Special detergent are used to get the dust away from the mould which will make no dark markings in the
 gel coat surface. 
Release agent: This will be brushed on the mould to make ejection easily.

2^nd Fiberglass and resin:
Gel coat: The color of products is decided by the gel coat,with thickness of about 0.3-0.5mm. UV resistant can
be added. 
Surface mat:  This is to avoid the air bubble on the surface, and also make fiberglass mat invisible from the finished
surface. 
Fiberglass mat: Normally we use 300g/m2 (0.6mm thickness) and 450g/m2 (0.9mm thickness). According to your
requests on the  thickness and strength, we will calculate how many layers of fiberglass mat should be used.


3^rd
Solidify:  The time required for solidifying depends on thickness and weather condition.Normally 24 hours for one
piece to solidify to avoid any deformation after demoulding. 
Demould: After solidified, the product will be demoulded
Cut and trim:  We will mark the trim line and hole positions on the mould,then trim according to the marks to
gaurantee the mounting dimensions



4^{th    Adhesion:  Professional mould and  Temperature   and worker}

5^{th  Â} Surface treatment :

6^{th Â} Painting

7^{th  Package Solution:}
Our principle: Safe and economical  
We choose economical packaging on condition that there will be no
damage during transportation.
Shipping: We are very glad to get the freight cost information for you
as we have long term cooperated forwarder
company.










8^{th     Quality Control of working :}
Technical document
as following                                      Testing  history data







Qingdao Lanmon Industrial Co., Ltd. was established in 2006, is located in Huangdao District of Qingdao
 Yuanjiazhuang community. Covers an area of 11,000 square meters, with registered capital of 10 million yuan.
Specializing in the researching and manufacturing of hand lay-up composite materials (FRP), SMC composite
materials (FRP) BMC composite materials and other products which used in rail transportation,vehicles and other
fields.Our company is a production enterprise integrating R & D, design, manufacture and sales.

We have 10 years experience of FRP complete production process, from moulding to painted end product, and
the quality of our products are well controlled with professional QC engineer. Our products has won the trust 
and favor of customers at home and abroad.
·
Mission: Extensive use of composite materials technology to protect our home environment






 

Indoor Wall Light

LEDER technology's indoor wall light provides stylish, adjustable wall lighting. Not only does it lend a fashion-forward feel to your ensemble, but it also frees up space on your nightstand to keep nighttime essentials on hand. Adjustable sconces are a perfect idea for use at the bedside, taking the place of bedside table lamps, and are also ideal task lighting for living rooms and other spaces.

This clean, polished wall light is stunning in its minimalism. Featuring an integrated LED wall light, the piece is both sleek and energy-efficient. LED indoor wall light can be the beautiful finish adds a luxurious touch to any room.

Features:

• Fashion design

• Low light failure and High color rendering

• Contemporary and contracted style

• Energy province electricity

• Made of metal

• Color temperature :3000k-6000K

• Optimizing material

• Protection rate: IP20

• Warranty:3 - 5 years

This LED indoor wall light brings traditional, factory-loft-inspired style to your bedroom or entryway that allows you to change where the shade is pointed. As a vertical wall sconce, this LED wall light adds contemporary flair to an entry, living room, dining room, or bathroom mirror.We have rich production experience in lighting. Except Indoor Wall Light, we also offered other product in Indoor Lighting .Such as : LED Downlight , LED Panel Light , Track Light , Linear Light , LED Strip Light , LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .

Indoor Wall Sconces,Indoor Wall Light Fixtures,Wall Lights Interior,Led Wall Lights Indoor

JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.floodlightsled.com