What are the main reasons behind the decline in granulation production at feed mills? After reviewing several articles, we've identified five key factors that could be contributing to this issue.
1. Wear on the ring die surface can significantly reduce the efficiency of the pellet mill. Over time, the rolling surface may become uneven or damaged, leading to poor pellet quality and lower output.
2. Mold holes that are spotted or have nicks can cause blockages or inconsistent pellet formation. These imperfections may result from improper maintenance or excessive wear, affecting the overall granulation process.
3. Incorrect adjustment of the roll gap can lead to inefficient compression and reduced pellet density. This not only affects production volume but also the quality of the final product.
4. Issues with decompression hole granulation can cause problems during the pelletizing process. If the decompression system isn't functioning properly, it may lead to inconsistent pressure and poor pellet formation.
5. Severe wear on the pressure roller is another common cause of reduced granulation efficiency. A worn-out roller may not apply enough pressure, resulting in lower output and substandard pellets.
Are there any other factors you’ve encountered that could affect granulation performance? We’d love to hear your thoughts—feel free to share your experience in the comments below.
Dcy Gearbox,Gear Gearbox Speed Reducer,Dcy Cycloidal Reducer Gear,Cylindrical Reduction Gear
JIANGYIN TIANCHENG MECHANICAL EQUIPMENT CO., LTD. , https://www.gearboxjc.com