Summer is a season of love and hate. Beer, beach, waves... Imagine endlessly when I think about it, but when it comes to high temperatures, it's all gone. The high temperature in the summer not only brings a "burden" to people's lives, but also may cause germs and other endangering the health of the home. Here's to talk about common summer indoor pollution and coping methods.
I. Summer indoor common pollutants
1. Dust mites
Dust mite is a creature that cannot be found by the naked eye alone. The ideal breeding temperature for dust mites is 23~35°C. Hot weather in summer will promote the rapid development of dust mites. Dust mites are fast-growing, have a large population, and can cause allergic reactions. As a result, dust mites are also classified as common indoor environmental pollutants. In recent years, more and more families have begun to use carpets, wallpapers, and soft cloths to decorate the indoor environment. As everyone knows, these decoration materials provide a comfortable breeding environment for dust mites. Dust mite itself is not chemically toxic, but the sensitization of dust mites can cause skin irritation and even asthma.
2, biological metabolites
Human body metabolites such as dander, hair, saliva, etc. will also have a bad influence on indoor air quality. Especially in the summer, when the temperature rises, it will accelerate the metabolism of the human body, and the body's metabolic waste will also increase. In addition, in the homes of pets such as cats and dogs, the metabolites emitted by pets will increase the impact on the indoor environment. This type of metabolic waste can make people allergic and increase the incidence of asthma.
3, mold
Mold, also known as "filamentous fungi," is a common indoor pollutant in the summer, and it is hot and humid in summer. It is very suitable for the growth of mold. Molds are very fertile and can grow quickly in a short period of time and are difficult to remove. As a kind of microorganisms, mold can cause symptoms such as malignancy, vomiting, and abdominal pain when ingested by the human body. In severe cases, it can also cause people to become unconscious. A French survey showed that mold is more sensitizing than pollen, fur and other substances. Among the 1,100 European asthma patients surveyed, patients with asthma allergic to asthma caused by mold allergies were approximately twice as likely to have asthma caused by allergies to other substances.
4, formaldehyde
Formaldehyde is a common source of indoor pollution. It is a colorless toxic gas. Many people think that only new homes that have just been renovated will have formaldehyde. This idea is wrong. The release of formaldehyde can be as long as 3-15 years. Even if it is renovated for some time, formaldehyde can be detected at home. In addition, when the concentration of formaldehyde is low, the odor becomes lighter, and it is difficult for people to detect the presence of formaldehyde through the sense of smell. Therefore, the absence of odor does not mean that there is no formaldehyde. The release rate of formaldehyde is affected by temperature, and the higher the temperature, the faster the release. Therefore, high temperatures in summer will speed up the release of indoor formaldehyde, which pollutes the indoor environment and poses safety hazards.
Second, summer indoor pollutants coping method
To cope with indoor environmental pollution caused by high summer temperatures, we can start with two aspects.
1, formaldehyde and other chemical pollutants
(1) For chemical contaminants such as formaldehyde, it can be cleared through window opening and ventilation.
(2) Physical adsorption is also a good choice for the treatment of formaldehyde pollution. For example, activated carbon can use its pores to adsorb harmful substances such as formaldehyde in the air.
However, the adsorption capacity of activated carbon is limited, and after the saturation of adsorption, it cannot continue to control pollution. To maintain the effect of governance, it is necessary to constantly replace new charcoal packs, which invisiblely increases the cost of formaldehyde treatment.
Nachinite can not only adsorb harmful substances such as formaldehyde, but also can decompose harmful substances into water and carbon dioxide, and no secondary pollution occurs in the entire decomposition process. Compared with traditional activated carbon, Na Jing Shi has no saturation boundary, so it does not need to be replaced, and it can save the cost of formaldehyde treatment.
2, mold and other biological pollutants
For biological contaminants such as mold and dust mites, all that needs to be done is to keep the indoor environment clean. Regular cleaning can help reduce dust mites and other sources of allergens.
In summer, the climate is humid. Keeping the indoor air circulation and the dryness of the environment can remove the source of water or moisture that causes the growth of the fungus.
To spend the summer comfortably, air conditioning is not an issue. Many people will choose to use air-conditioning for ventilation, but the air-conditioning filter is easy to accumulate dust, so remember to clean up frequently.
The above is about the introduction of indoor pollutants in the summer and I hope to help you. If you want to learn more about summer home knowledge, please pay attention to this website decoration information channel.
Activated carbon air conditioner
Tilting disc Check Valve we provided with pressure seal type and normally used for high pressure system of industrial pipeline from class 900 to class 2500. Valve size from 4" to 24". The advantages of tilting disc check valve are with lower flowing resistance, energy efficiency as well as long service life.
Tilting Disc Check Valve,Disc Check Valve,Double Check Valve,Tilting Disc Wafer Check Valve
Yongjia South Trading Co.,Ltd , https://www.n-lvalve.com