The stoves of many families are made of red bricks. Nowadays, most of us use whole cabinets instead of red brick stoves. Many people think that red brick stoves are a feature of China. So today and everyone together to find out what is the red brick stove step , look at the steps of the red brick stove stove look after the environmental protection and characteristics of brick cabinets return.
Steps using red brick stove
1. First of all, it is necessary to position the hydropower pipelines. The hydropower pipelines are concealed projects. Whether the whole cabinets or red brick cabinets need the layout of hydropower pipelines, the location needs to know the location of the hydropower in the kitchen, and the concrete of these areas. The standard is accurately marked on the wall, and the orientation of the inlet pipe, the drain pipe, and the various outlets are arranged.
2. The cabinet stove first needs to make a corner, and when doing the corner, it is best to choose the brick and reconcile the overall personality of the kitchen. In the future, we will use cement mortar to fill in the bottom of the cabinet and fill it with tiles. While laying out the tiles in one go, the position of the tile vertical partitions is reserved according to the plan drawings.
3. Based on the measured and planned table surface standards, the wooden keel is used to construct the structure to be poured on the table top. The rebar (6-10mm) is cut to a suitable size as the reinforcing steel skeleton of the casting table. Assuming that it is a special local load-bearing, steel rebar can be used in addition to steel reinforcement. After pouring the skeleton, tie it with iron wire or copper wire, knot and fix it.
4. After the structure of the cabinet is completed, gravel, sand, and cement are poured. It is usually sprinkled and cured after 1 day of pouring. After curing for 7 days, it will be dry.
5. After casting a good cabinet, care about the columns and cabinets;
6. Post the cement countertop with cement paste and use a grinding wheel to repair the countertop. Assuming the plan of stone countertops for the equipment in the later period, the table will be repaired and leveled just in time for the equipment that was bought later.
7. Post the waist line of the cement countertop, you can use tiles or other broken bricks. There is also a mosaic effect that is popular today.
Red brick stoves note
1. Before making the stove, you need to leave a sink standard at the cabinet door so that you need to measure it before you customize it. Since the cement and the tiles have been cured, it is assumed that they will be changed again. Only hammers can be used to knock them.
2. The sink for brick-built cabinets is also a question that needs attention. The side of the sink is thin, and there may be several sides. Assuming there is not enough space, the sink equipment is also very handy.
The above is the steps and related precautions brought to us by the red brick stove . We hope that the above introduction can help everyone and want to learn more. Please continue to pay attention to this site. More exciting please stay tuned!
Kitchen Countertops Kitchen Cabinet Countertops
Common parts: the bowl, mantel, moving cone liner, liner fixed cone, conical dryer dental plate, cone crusher parts
Main material: high manganese steel, chrome-manganese (Mn13, Mn13Cr2, Mn18, Mn18Cr2), Carbide
Casting Process: water glass sand casting and lost foam casting process
Adapt materials: river gravel, granite, basalt, iron ore, limestone, quartz, diabase, iron ore, gold, copper, etc.
Applications: quarry gravel, concrete mixing station, dry mortar, desulfurization plant, quartz sand
Hp Cone Crusher Spare Parts,Crusher Machine Parts,Hp300 Cone Crusher Spare Parts,Hp Cone Crusher Wear Parts
Ma An Shan Shi Bo Da Jing Shen Machinery Co.,ltd , https://www.bodamachinery.com