On January 6th, 2017, just after the Laba Festival, the sky just had a white belly. We and the boss of Song Fu, who was hoisted by Beijing Fuyun Dapeng, did the final inspection before leaving the car and rushed to a large wind farm in Longkou, Yantai City, Shandong Province. Here, a wind power hoisting blockbuster will be staged here.
Going to the wind farm at 6 o'clock in the morning
On the way up the mountain, I chatted with the boss of Song. I was catching up with the heavy pollution of the air in Beijing and Shandong in the past few days. We also have a lot of helplessness in the jokes. We can only help the construction of wind power and green energy by ourselves.
XCA550 superior climbing ability
On the way to the construction site, Xugong XCA550 has more than 100 hilly dirt roads. More than 50 hillsides of not less than 30 degrees have to be overtaken. Not to mention big cars, ordinary off-road vehicles are not good, let alone 20 meters in length. A large crane weighing 90 tons. Under the guidance of Xugong's service engineer Li Shifu, Song Gong, the operator of Xugong XCA550, felt the super-loaded climbing force for the first time. As the industry's first 550-ton seven-bridge product, XCA550 achieves the ultimate level of Qiqiao products. Through XCMG's leading dual-power drive, it realizes five-axis drive, and the heavy-duty transition slope ability is up to 35%, which is an industry overload. The strongest transition ability.
58 tons of motor installed in place
The fully upgraded self-disassembling technology enables the self-disassembling function of the boom, super-lift, legs and counterweight to be self-disassembled without the need of an auxiliary crane. It takes only 2.5 hours from the driving state to the lifting operation. Independently designed independent suspension axles, the load capacity of a single axle is increased to 40t, the minimum ground clearance of the vehicle is 380mm, and the independent oil and gas suspension technology has better performance and higher driving comfort.
Let the wind turbine equipment be installed in place before the arrival of the windy season
XCMG XCA550 arrived at the construction site facing the test of large winds. Under difficult conditions, the construction workers were armed with the help of Xugong field service personnel, with a strong wind of 9m/s, and the big arm, super-lifting and supporting legs were well-organized. It is mentioned that the advanced self-disassembling technology saves us a lot of time and also saves the cost of using an auxiliary crane. We use a 90-meter main boom super-lifting condition plus a 6-meter dedicated wind power arm. The center height of the fan is 80 meters. The 58-ton head and the 4-ton multi-lock are firmly docked in the tower base in high wind. On the seat, the bolts were successfully aligned and the cable was released successfully. The blade weighing 36 tons was seated again in the cheers without any suspense. Her perfect performance won the applause and deep appreciation of the construction party. The outstanding performance of Xugong G's new generation was also recognized by Song boss. Song boss immediately decided to reserve a XCG XX75 as an auxiliary vehicle to contribute to the motherland in the future green energy construction journey!
The hoisting has not ended, Song boss can't wait to make a victory gesture
The XCMG XCA550 has installed two 1.5 MW wind turbines in 4 working days. Its excellent climbing performance is commendable, and it can climb the 40-degree slope smoothly. Its stable hoisting performance has made another great achievement for green energy construction. Excellent performance and perfect on-site performance once again prove to the world the strength of China's manufacturing.
Like a giant with open arms, he embraces the peaks under his feet.
Editor in charge: Gao Lei
Graphite Electrodes mainly use needle coke, petroleum coke, as raw material, coal pitch as binder, calcination, ingredients, kneading, molding, baking and graphitization, machining and made, which is released in electric arc furnace in the form of arc conductor of electricity to heat melting furnace charge, Graphite Electrode with low resistivity, graphite electrode good conductivity, graphite electrode low ash, graphite electrode uniform and compact structure, good oxidation resistance, high mechanical strength, etc.
Hp 350 Graphite Electrode,Hp 350 Electrodes,Low Consumption Electrodes,Electrodes Hp Steel Making
Carbographite Industrial PTE.LTD , https://www.carbographite.com