[China Aluminum Industry Network] Manufacturers of aluminum-plastic steel doors and windows equipment are classified according to regions, mainly in Jinan, Shandong, and Foshan, Guangdong. Jinan doors and windows (entry term "doors and windows" provided by the Encyclopedia of professional encyclopedia) equipment shopping malls, steel-aluminum-plastic steel doors and windows equipment and broken bridge aluminum-aluminum-plastic steel doors and windows equipment (aluminum-aluminum-plastic steel doors and windows equipment) to go hand in hand, and in the south side of the shopping mall more and more attention Broken aluminum-aluminum steel doors and windows equipment. From the development trend, aluminum-plastic steel doors and windows equipment professional prospects are broad. In particular, with the improvement of our living standards and the enhancement of environmental protection awareness, the potential for building distinctive energy-saving windows and doors and smart windows and doors is endless. Together, there will be an increasingly fierce competition in the market for aluminum-plastic steel doors and windows equipment, and the focus of the competition will be on quality and service.
Aluminium-plastic steel door and window equipment, as the name suggests, is the main equipment used to process and manufacture doors and windows (including aluminum alloy and plastic steel doors and windows). The rise and fall of aluminum-plastic steel doors and windows equipment is closely related to the development of windows and doors occupations. For example, in 2012, the aluminum-plastic steel doors and windows equipment shopping malls are the result of the state’s regulation of real estate occupations, and the number of high-rise buildings has been greatly reduced, resulting in a drastic reduction in the number of windows and doors used. The malls of aluminum-plastic steel doors and windows equipment are relatively gloomy. This year's aluminum-plastic steel doors and windows equipment shopping mall is in a relatively difficult situation, once, in Jinan, two relatively large logistics ports: zero logistics and Quansheng logistics, every spring cargo station is full of aluminum-plastic steel Door and window equipment. Nowadays, the exuberant situation of aluminum-plastic steel doors and windows equipment is no longer present, and it is only dispatched every day.
Aluminium-plastic steel door and window equipment was reported back from an interview in Jinan. Jinan produced a broken bridge aluminum (the term “aluminum†was supplied by the Encyclopedia of Professionals), an aluminum-plastic steel door and window device and a mall of aluminum-plastic steel doors and windows. The internal competition was very fierce. . For example, efforts to carry out high-end products, quality of the big brands, invest a lot of money for product development, and many aluminum steel doors and windows equipment companies actually reveal imitation, from equipment to the brand VI, seriously undermine the interests of brand manufacturers, disrupt the professional order . Aluminum-plastic steel doors and windows equipment advocate brand companies, attach importance to the maintenance of intellectual property rights, the use of legal weapons, open investigations and sanctions on them. In addition, the occupational access threshold for aluminum-plastic steel doors and windows is relatively low, and many self-employed manufacturers in Jinan are sporadic. Two or two of their own joint venture rented workshops to assemble aluminum-plastic steel doors and windows equipment. Therefore, every time a customer contacts us, they will advocate that if they want to purchase steel-aluminum-plastic steel doors and windows equipment or broken bridge aluminum-aluminum-plastic steel doors and windows equipment, they must visit the site in Jinan to see if the company can truly let you centering. Did the ad words of today also say it: Buying the right care, using the right kind of stuff? In summary, there are many self-employed people in the aluminum-plastic steel door and window equipment store. When we purchase steel-aluminum-plastic steel door and window equipment and broken bridge aluminum-aluminum-plastic steel doors and windows equipment, we must pay attention to the evaluation of the brand's reputation by the professional media, and try to visit the manufacturer where possible.
At that time, the reduction in the sales volume of aluminum-plastic steel door and window equipment stores had a major correlation with the real estate downturn. However, the company did not have to sit still. Automatic product planning research and development, innovative new varieties, production of diversified products, to the full range of individualized consumer attention to the eye, aluminum-plastic steel doors and windows equipment is not a good way to improve sales. Nowadays, the collective cost is mainly spent after 80 and 90. Personalized planning can make people feel refreshed. Therefore, companies in the building material industry chain should strive to make innovations in product planning, meet market requirements, and vote for the favorite of consumers.
PE Plastic Rod, full name is Polyethylene Rod.
Physical properties: PE plastic Rod is the most simple structure of the macromolecular organic compounds, the world's most widely used polymer materials, composed of ethylene polymerization, depending on the density is divided into high density polyethylene Rod, medium density polyethylene and low density polyethylene.
(1) LDPE Rod
Low density polyethylene Rod (also known as high pressure polyethylene Rod)
(2) LLDPE Rod
Linear low density polyethylene
(3) MDPE Rod
Medium density polyethylene
(4) HDPE Rod
High density polyethylene (also known as low pressure polyethylene)
(5) UHMWPE Rod
Ultra high molecular weight polyethylene(6)Modified polyethylene Rod
Chlorinated polyethylene (CPE) and crosslinked polyethylene (PEX)
(7)Ethylene - ethylene copolymer
Ethylene/propylene copolymer (plastic), EVA, ethylene, ethylene butene copolymer - other olefins, such as octene POE, cyclic olefin copolymer, ethylene/unsaturated ester copolymer (EAA, EMAA, EEA, EMA, EMMA, EMAH).
Polyethylene, which has a molecular weight of 3 million to 6 million, is known as UHMWPE.
Ultra high molecular weight polyethylene Rod is very strong and can be used for body armor.
1. Papermaking industry: suction box board, scraper, molding plate, bearing, gear;
2. Mining industry: charging barrel, abrasive and adhesive-resistant back lining for warehouses;
3. Chemical industry: acid pump, filter plate, worm gear, bearing;
4. Food industry: packing machinery parts, bottle guide, screw, wear plate, slide way, stud weld, roller and other transmission parts;
5. Textile industry:buffer board;
6. Food processing industry: chopping block, refrigerating plant;
7. Wharf: anti-collision board.
1. Acid and alkali resistance, resistance to organic solvents
2. Excellent electrical insulation and static resistance
3, Can still maintain a certain touness even at low temperature
4. Extremely high impact strength
5. Low friction coefficient
6. Non-toxic
7. Low water absorption
8.Lower density than any other thermoplastic plastics (<1g/cm3)
Disadvantages:
PE Plastic Rod have Weak mechanical property, air permeability, easy deformation, easy ageing, brittle, brittle less than PP, easy stress cracking, surface hardness, easy to scratch.
Difficult to print, in printing, surface discharge treatment, cannot electroplating, the surface has no luster.
Specification: the diameter of the PE rod can be produced from 2mm to 250mm. The conventional length is 1000mm, and the length is unlimited.
The thickness of PE Rod material can be produced from 0.3mm to 1.9mm, the normal width is 600mm, the width cannot exceed 1200mm, the length is not limited.
The thickness of plate can be produced from 2mm to 180mm, the usual specification of 2-10mm is 1000mm* 2000mm, and the commonly used specification of10-180mm is 600*1200mm.PE Rod can also be customized according to requirements, and the width cannot exceed 1200mm, and the length is not limited
Color: natural color is wax white, also can be customized black and color, the order of the color to order is 500KG.
Add antistatic agent to the permanent antistatic electric bar, and the volume resistance value is between 6 to 9 power of 10.Add flame retardant to the flame retardant rod from UL 94V-0 to HB flame retardant grade, and other modification requirements are required to customize various additional properties according to the actual use of the customer.
Combustion characteristics:
Combustion situation: easyCombustion flame status: molten drop, yellow lower blue
After the fire: continue to bur
Smell: the smell of wax burning
Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.
Pe Plastic Rod,Polythene Rod,Polyethylene Pipe,Pe Rod Pipe
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com