Analysis of Three Characteristics of the Swing Gate Products

Three characteristics of swing gate

1. Aesthetics: The current of the swing gate is a single column, double pendulum, and slender type. Beauty can only be judged by itself.

2. Security: The swing gate is generally based on infrared photoelectricity to detect the flow of people. When errors are detected, the pendulum door will hit pedestrians and cause unnecessary disputes. The number of photocells cannot be too small. Swing the door can not be too much force, otherwise it will hurt. In the closed position, the swing door cannot be manually opened, otherwise the basic requirements of the access control are lost.

3. Reliability: The reliability of the swing gate is based on the reliability and integration of the various components of the gate. The selection of good quality components is the basis, such as card readers, controllers, monitors, etc.; the integration method mainly depends on the design selection and communication method of the control unit. The presence or absence of lightning protection components also affects the reliability of the equipment.

System main functions and features

1. The gear locking mechanism is used for automatic locking and unlocking, which makes the operation of the cylinder pendulum brake more safe, reliable and convenient.

2. The entire system runs smoothly, with little noise and speed.

3. Has a unified, standard external electrical interface, can be linked with a variety of read-write devices, easy system integration, and can achieve remote control and management through the management computer.

4. Can expand the clear traffic indication function, with an intuitive LED mode or backlight to indicate to the passerby or prohibit the passage.

5. Has read cassette memory and no memory function, and the user can set according to their needs through the built-in touch buttons.

6. Through software settings, the total number of people within the site can be limited to meet special requirements for special occasions.

7. With automatic reset function. After the card is read, if the passer does not pass within the specified time, the system will automatically cancel the current pass of the passer, and the limited travel time can be set by the administrator.

The main technical parameters

1. Using the brake movement, multi-level sensor positioning mechanism, ARM9 control system, without any mechanical collision, stable operation, quick opening, compact appearance, beautiful and generous;

2, open / close gate speed 0.7 seconds, open / close gate speed can be set;

3, fault self-test and alarm prompts, user-friendly maintenance and use;

4, with automatic reset function, after the opening of the gate, the passage of time in the specified time, automatically cancel the user's access to the right;

5. Preventing tailgating and preventing an excessive number of non-permissible situations;

6, anti-clip, anti-collision function, in the process of resetting the swing arm, the motor automatically stops working within the specified time, after the default delay reset again (until reset), and the intensity is very small;

7, anti-flushed function, in the absence of receiving the opening signal, the swing arm automatically lock;

8, swing arm synchronization adjustable (for double pendulum situation);

9, compatible IC, ID card, can be configured; can be used with other channel products;

10, with a variety of operating modes to choose from, through the programming signal to control the gate passage time, traffic speed, brake speed and a series of parameters;

11, access to two electrical interlocks. When working in one direction, the other direction is blocked, authorization is invalid; 12, waterproof, sunscreen, cold, high temperature;

13, can expand the function, prompt pass indicator, sound and light alarm;

14, can access the signal: fire alarm signal, emergency shut-off signal, and can be connected to other control signals according to customer requirements, in order to achieve the needs of expansion.