Multi-purpose fire pump adapter is a special fire-fighting equipment for water supply of high-rise building supporting fire pump, which mainly solves the problem of insufficient hydraulic pressure in high-rise buildings and ensures fire-fighting water for high-rise buildings. It has small size, beautiful appearance, reasonable structure, easy maintenance, etc., is the upgrading of old products new products. Now to introduce the combination of fire pump operation and maintenance. Fire Pump Combiner Fire Pump Installation Operation and Maintenance: 1. When the adapter is delivered from the factory, all parts should be tested and operated. It is not advisable to dismantle it during installation. Please pay attention to the water supply direction. 2. The adapter gate valve is used as a maintenance pump adapter, usually should be in a normally open state. 3. To regular inspection, maintenance, the rotating parts lubricated once every six months, to maintain rotation flexibility. 4. The most adverse points of the test system pressure, flow is in line with design requirements. 5. Check the system connecting pipe, check valve, safety valve, vent pipe, control valve flexibility, and observe whether the leakage, seepage phenomenon. 6. Check the fire pump adapter logo exists, covers are intact. Further Reading: pump valve pipe fittings Exhibition Water Expo Xiamen exhibition of marine equipment Internet + Forum Yiwu Fair 2016 exhibition mold top ten brands of the Internet information industry (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / WeChat: 2355962924) http://beng.liuti.cn/ (Service Hotline: 400-6030-811)
