Before understanding the home chandelier , we first understand the relevant knowledge of the chandelier. The chandelier is not only a lighting effect for home decoration, but it also plays a decorative role. Today Xiao Bian introduced to you the analysis of household chandelier installation steps and what are the types of household chandelier, hoping to be helpful to everyone.
一ã€Introduction of home chandeliers
Ceilings are usually installed in the room, which has the advantage of saving space. At the same time, it also effectively decorates the space and increases the aesthetic appearance of the room. There are two kinds of ceiling lamps and pendant lamps with wires and iron hanging.
Second, household chandelier types
There are many kinds of household chandelier in different shapes, which are divided into flat round, square, rectangular and so on. According to the structure of the ceiling lamp, it is divided into two types: floating type and embedded type. The most common chandelier in the country are European candlestick chandelier, Chinese chandelier, crystal chandelier, parchment chandelier, fashion chandelier, conical visor lamp, pointed flat flower lamp, corset lamp, five-prong ball chandelier, magnolia lamp, olive chandelier. Wait. In addition to these, according to the number of heads divided into single head chandeliers, double heads, three heads and so on, the living room, lobby generally use long chandelier, so to achieve the best decorative effect, and single head chandeliers are generally used in bedrooms, restaurants, etc. space.
Third, the household chandelier installation step analysis
The first step: First, before the installation, the position of the pendant lamp and the accessories for the use of the tool should be determined. Probably sized to detect accurately, determine the installation position. Tools for punching are: wood strips, plates, hardware fittings, screws, hammers, adhesives, etc.
Step 2: Connect the drilling tool to the power supply. Drill a hole in the gypsum board with a drilling tool, and then bury the iron fittings or wood strips. Then use an adhesive or grout to fill the entire perimeter of the hole. Wait until it is almost dry and move on to the next step.
The third step: Do not install the iron or wooden bar firmly. This is a crucial step for the installation of the pendant lamp. If it is not firm, its life cycle will be greatly affected.
Step 4: Use a wire to run the wick through the hanger. If the accessory lamp is connected to the switch, pay attention to the mounting direction of the wire when threading.
Step 5: The last step is the installation of the lamp shade and lamp arm. Use a screwdriver and other accessories to install the lampshade. After the work is completed, try to power it up. Adjust it slightly according to the actual situation.
Summary: Buying a good product can not only bring you a different decorative effect, but also a guarantee of a healthy life. The above is the analysis of the installation process of household chandelier and the related knowledge of the type of household chandelier brought by Xiaobian. For more relevant knowledge, please continue to pay attention to this website.
Household chandelier
Uv Lamp Led,Waterproof Uv Light,Ultraviolet Tube Light,Small Uv Lamp
Foshan Kingrate Optoelectronic Technology Co., Ltd. , https://www.kingrateuv.com