Pneumatic slurry pump is suitable for conveying liquid slurry with high viscosity (VIS) of 50,000 CPS / 25 ℃. It has the functions of anti-corrosion, anti-settling, low noise and energy saving. It is the ideal mobile conveying equipment. Now to say the use of pneumatic slurry pump and precautions. Slurry pump pneumatic slurry pump usage and precautions 1, the first guide tube correctly into the barrel to be transported. 2, the corrosion-resistant hose connected to the discharge port to the feeding location. 3, the intake valve is closed, and then connect the gas source into the gas connector, according to the desired flow of slurry to open the intake valve to adjust the operating frequency of pneumatic slurry pump, you can work. 4, at work, such as the cylinder body heat (to feel hot subject), should immediately add 30 # lubricants. 5, the use of the process, such as the regulation of seal wear, leakage occurs, adjust the nut should be promptly adjusted. Further Reading: pump valve pipe fittings Exhibition Water Expo Xiamen exhibition of marine equipment Internet + Forum Yiwu Fair 2016 exhibition mold top ten brands of the Internet information industry (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / WeChat: 2355962924) http://beng.liuti.cn/ (Service Hotline: 400-6030-811)
