With the continuous improvement of living standards, people's pursuit of sanitary ware culture is becoming more and more intense. Choosing a quality shower room will not only allow us to enjoy the pleasure of showering, but also avoid the tedious and frequent cleaning caused by dirty water spillover. The installation of the shower room will affect the effectiveness and longevity of the shower room. Therefore, it is very important to pay attention to the installation of the shower room. You should pay attention to the following points when installing the shower room:
 Kim Sari Shower Room Â
1. After the shower room package is opened, please place the glass against the wall in a vertical position. Placed horizontally or unevenly, the glass may be damaged, causing property damage or personal injury.
2. When transporting, the glass can be broken easily by horizontal transport in the shower room. It must be carried vertically by two or more people at the same time, and avoid collision with hard objects.
3. Burning a cigarette, such as a cigarette, will destroy the spray or glass. Be sure to stay away from the fire.
4, do not stand, rely on the shower, do not place heavy objects in the shower room;
5. It is forbidden to use chemicals such as acids, alkalis and organic solvents and acidic cleaners when cleaning, otherwise the surface of the product will be damaged;
6. Use clean water or neutral detergent to clean the surface of the product. For stains that cannot be removed, use a clean cloth soaked with a small amount of alcohol to remove stains.
7. Acrylic products start to soften when heated to 100°C, so they should not be stored or used in a high temperature environment of 80°C or above.
8, the presence of static electricity on the acrylic board is easy to attach dust, when cleaning the acrylic bottom basin only use a cotton cloth dipped in a little soap and water can easily remove dust and achieve cleaning effect;
9, avoid contact with benzene, paint, paint cleaners and other strong organic solvents, if accidental contact may cause surface softening, dissolution and other endanger the occurrence of product quality phenomenon;
10. It is strictly forbidden to wipe the surface of the product with a sharp or abrasive article.
11. It is forbidden to wipe with a decontamination powder. The decontamination powder will corrode the surface and reduce the surface smoothness;
12. When using sealed silicone, do not apply silicone on the acrylic surface. If you do not care, do not rush to wipe, so it is more difficult to remove, should wait until the solid gently remove it, is strictly prohibited scratching with a hard object, otherwise it will lead to surface damage. After the bottom pot is installed, it should be used after the silicone is completely cured (silicone curing time is 24 hours).
When purchasing goods, some consumers choose some low-cost, poor-quality shower rooms in order to save money. After a period of use, the pulleys can't move, the accessories are damaged, and the water leakage is severe. , Manufacturers also have no safeguards in terms of maintenance, and even shirk responsibility and evade problems, so please pay attention to the choice of quality and service. The service life of a set of high-quality shower room is 3-5 times that of inferior shower room, and the use effect is even more difficult. Comparable.
Shower room three trees paint paint glass paint
Paulownia Edge Glued Board Co., Ltd. , http://www.nsplywood.com