During the decoration process, the switch socket is always inseparable, so it seems that the installation process is simple, but it requires a lot of installation specifications. Switch sockets are always electrically safe, so it is especially important to install height or how to install it safer! Let the decoration home decoration network Xiaobian introduce the switch socket installation specification for everyone!
Switch installation specification 1: switch installation position should be convenient for daily use, the distance from the door is about 0.15 ~ 0.2m, if it is in the bedroom, the height should be 1.2m ~ 1.4m; the kitchen uses more water, the height is best at 1.4 More than m, it is safer; avoid moisture in the bathroom, the height is preferably 1.4m ~ 1.8m. The height of the pull switch is 2~3m. If the layer height is low, the pull switch should be no less than 10cm from the top plate, and the pull wire outlet is vertically downward.
Switch installation specification 2: With a switch in one room, the installation height should be the same, the switch height of the same model should also be the same, no misalignment occurs in order. The spacing between the side-by-side cable pull switches shall not be less than 2 cm.
Switch installation specification: 3: When the switch is concealed, the panel should be close to the wall surface, and there is no gap around it. The installation is firm, the surface should be smooth and tidy, without chipping or scratching.
Socket installation specification 1: If the safety socket is not used, the socket installation height of the children's activity places such as nurseries, kindergartens and elementary schools should be higher than 1.8m.
Socket installation specification 2: The socket is concealed in the same way as the switch. It should be close to the wall surface to ensure no gaps around it. The installation is firm and the surface should be smooth and tidy, without chipping or scratching.
Socket installation specification 3: Sockets in workshops and laboratories, the installation height shall not be less than 0.3m from the ground, and the sockets for concealed installations in special places shall be not less than 0.15m. The installation height of sockets in the same room or place shall be the same.
Socket installation specification 4: If it is a ground socket panel, it should be flush with the ground or close to the ground, and the cover should not be moved and sealed well.
About the knowledge of the switch socket installation, the decoration home decoration network Xiaobian will introduce you so much. Keep in mind that switch socket installation specifications help you plan from the details of the installation, and it is guaranteed in daily use. For more related knowledge, please pay attention to our decoration encyclopedia!
Motorized Electric Zebra Roller Shades
View Through Banded Roller Shades,Motorized Zebra Roller Blinds,Filting Light Zebra Roller Blinds,Soft Yarn Motorized Blinds
Shenzhen Yuaneng Industrial Co.,Ltd , https://www.bi-colour.com