When decorating an old house, the original budget would often not be enough, because in addition to the basic decoration, the old house may also involve demolition, structural transformation and large-scale water circuit transformation. These complex renovation projects have increased the overspending of old houses. Possible.
In general, the price of the old house decoration will be 10%-20% higher than the new house decoration. However, in fact, there are a lot of available parts in the original decoration of old houses. If we maintain the current status of this part of the renovation or minimize changes, we can save a small amount of money.
Calculate the details of the old house transformation is more "economic"
Demolition of the old decoration, wall treatment, structural transformation, water circuit renovations make second-hand housing renovation expensive. In fact, the decoration of second-hand houses does not need to be costly, because there are still places that can be used in the old renovations. To use them, the entire renovation cost will be much more economical.
--------ã€Save Money】--------
To meet the needs of use to minimize changes
For the second-hand housing renovation, once there is a change, it may bring no small cost, so the most economical way to renovate second-hand housing is to change the existing layout of the home as little as possible, but only if it can meet the needs of family members. Based on demand. If you want to reduce the cost of "sacrificing" the use of future functions, it will bring great inconvenience to your life.
So, what steps can be taken in the renovation of second-hand housing to reduce changes and reduce costs?
â– Kitchen tiles
The cost of kitchen and bathroom tiles can account for at least 10% of the cost of the main material, so if the original decoration of the second-hand house does not last long, the tiles used by the kitchen and bathroom do not have a lot of empty drums and fall off, and the style is not out of date. replace. Replacing easily prone parts such as ceilings in kitchen and bathroom spaces with new materials will refresh the entire kitchen space.
â– Wall treatment
Most of the old-fashioned second-hand housing walls will be cracked. The cause of cracking lies in the treatment of the grass-roots walls. If the walls are non-water-resistant putties that are easily ashed and powdered out, then such walls will need to be redone. However, if the original wall is water-resistant putty, you can consider using local patch to prevent cracking, the cost of the patch is roughly ten yuan per square meter.
â– Waterway reconstruction
The waterway reform can be described as a “major surgery†for second-hand housing, so it costs a lot. Generally speaking, the home improvement company renovates the waterway according to the difference between the bright and dark pipes, and the price ranges from roughly RMB 890 to RMB 100 per meter. Therefore, minimizing the waterway reform will greatly help reduce the overall renovation cost.
Whether the water pipeline needs to be transformed must first check whether the existing waterway layout meets the needs of family members. If it can meet the requirements, the existing waterway position can be maintained. And then check the material of the water pipe, many of the old house's water pipe is galvanized pipe, this pipe will produce rust in the pipe wall after many years of use, affect the water quality, and the galvanized pipe will also "sweat" in the summer, There will be a large amount of water droplets on the outside of the wall. If it is not treated with anti-corrosion and moisture, it will cause the wall to be damp.
â– Circuit Modification
Circuit renovation is also the highlight of the renovation of old houses. Judging whether or not the circuit needs to be transformed is very important. It not only involves the increase in the overall cost of renovation, but more importantly the safety of household electricity in the future.
Most of the old houses that have reached the age of 20 to 30 years are mostly only one circuit. Such switches and sockets are dangerous to use in the way they “share†a single wire, which can easily lead to excessive circuit loads. Old wires can also cause fires. .
At present, the circuit layout of most households is divided into three sections: the switch, the socket, and the high-power electrical appliances. The wire diameter is 2.5 square millimeters. If the old house circuit is such a layout, the circuit can be considered as a whole. For customs clearance, you can increase the number of sockets and switches to meet the demand for electricity.
However, the 2.5mm square wire load limit is roughly 5,500 watts, so the choice of bathroom, kitchen appliances must consider its power, such as the use of hot water heaters in the bathroom, 2.5 mm square wire is far from enough. Therefore, it is imperative to communicate with the hydropower designer when reconstructing the circuit. Carefully consider the power needs of family members.
Second-hand House Renovation Information Money Decoration Renovation Socket Decoration Socket Electrical Home Decoration Switch Heating Plasterboard Ceiling Ceiling Renovation Steps & Budget Renovation Cost Budget Decoration Find Decoration Company How Do You Decrease Living Room Kitchen & Bathroom Ceiling Bathroom Tile Toilet Ceiling Material Bathroom Waterproof Price Bathroom Ceiling Overall Bathroom Bathroom Design Bathroom Waterproof Bathroom Leakage Exterior Tiles Bedroom Lighting Tiles Price Kitchen Tiles ld Tiles Bedroom Bedroom Lights
Led Wall Mixer,Led Basin Faucet,Led Basin Mixer
Automatic Faucet Shower Series Co., Ltd. , http://www.sinyo-faucet.com