Plastic additives not only make the polymer easy to process, but also largely compensate for the lack of the polymer itself, such as improving the performance of the product and prolonging the service life. Therefore, it is no exaggeration to say that without the cooperation of processing aids, there is no development of the plastics industry.
Whether the plastic additives are selected correctly directly affects the processing, product performance and service life. When using additives, Jiuzhi Plastics Network recommends that you consider the following four main issues:
1. Compatibility of additives with polymers
Compatibility refers to the ability of the additive and the polymer to be well mixed uniformly without precipitation of phase separation. The auxiliaries must be stably present in the product for a long period of time in order to perform their intended functions, so auxiliaries with good polymer compatibility should be used as much as possible.
2. Adaptability of additives to processing conditions
The same polymer, because of the different processing methods used, the plastic additives required are also different.
3. Give full play to the synergy of the helper
A plastic often uses a variety of auxiliaries, which are in the same system, often interact with each other, and if properly matched, have synergistic effects when used, called "synergy."
4. The use of the product limits the additives
The choice of plastic additives is often limited by the use of products, such as plastic products always have to be in contact with people, especially those food packaging and blood transfusion materials, etc., which are more closely related to human health.
The Carbon Crystal Heating Panel is a new kind of heating product. The heating meaterial is made from carbon crystal which is better than carbon fiiber. The heating effect is the best among the electric heaters.
The Carbon Crystal Heater has many advantages, such as clean, and beautiful looking, and not any pollution, and no noise.
The using of this heater is for example: a 20m2 room will need about 1500 - 2000w, the choose then can be 4pcs x 400w or 4pcs x 500w.
We are the biggest manufacturer in China of heating panels. Our Laiwu factory covers more than 130000m2, more than 200 employee, and annual output is now half million pcs.
Dexiang heater has all certificate needed, such as ISO, CE, ETL, etc.
We welcome all customer all over the world come to visit us and be friend !
Warmer Appliance
Warmer Appliance,Infrared Radiant Panel Heaters,Floor Infrared Heater,Bed Mattress
Shandong Dexiang Electrical Technology Co.,Ltd , https://www.infraredroomheater.com
