Some consumers think that cheaper prices are good goods; some consumers think that brands are not necessarily good goods, and ceramic tiles are no exception. These misunderstandings lead consumers to not buy ceramic tiles that fit their minds. How can consumers avoid these? Misunderstanding?
1, the project tail goods, special bricks can not be met
Real engineering tails and special bricks are hard to come by. The project tail goods and special bricks generally refer to some bricks remaining after construction on a certain project. Since the batch number of the color is not much, it is difficult to sell normally, so the special treatment solves the inventory problem. However, it is very difficult to encounter such bricks in real life. Even if you have actually encountered it, how can the remaining quantity, style and color just match your needs "just happen". If it doesn't "just happen", then the remaining bricks are not more difficult to sell or even no one wants to throw them away? For example, if you need 30 square meters, but the other party has 35 square meters left, you buy the remaining 5 square meters. How to deal with it? Throw it or still?
2, the back of the cabinet, the cheap bricks below, do not buy separately
It is understandable to use cheap bricks on the back and below the cabinets. Diligence and thrift are the traditional virtues of the Chinese nation. However, don't go to the market alone to buy. Because buying bricks is very cheap, but this brick is no one to give a separate delivery, you add shipping, upstairs fees after a calculation, the top ten brands of ceramic tile suggestion: when buying genuine and the seller to ask for, to buy some Cheap bricks, you know, they can buy the absolute price! And also know who has this kind of processing bricks, but also help you transport.
3, buy bricks must also consider additional costs
Some owners have been nervous, and the result is to pay attention to the price of bricks, forgetting the additional cost. It is necessary to know that bricks with too large a specification are not only expensive but also have high losses. The price of bricklaying by the construction bricklayer can generally be ranged. If the price exceeds this range, it is necessary to add money because it is not easy to shop. For example, if the floor tiles are too large, such as 800*800 bricks, the thin tiler can't be laid alone. Even if the one-meter-eight big man is put up, it will take a lot of effort. Generally, there should be two people. Can you add more money? Bricks, such as mosaics, are laid out in the same way as other normal-sized bricks. The area is much less, which seriously affects the progress of the project, and affects the income of the bricklayer. Can you add any money?
4, should pay attention to the overall use of the effect
There are a lot of people who have to worry about the brick design, but it is only the effect of the empty house. You must think about the possible effects after the furniture is finished. For example, the living room floor, consider Have you carefully designed the pattern after the sofa or cabinet or table has been covered? For example, the wall, have you considered the overall color and layout after the door is finished? Don't just look at it.
Re-Dispersible Latex Powder
Re-Dispersible Latex Powder produced by spray-drying special water-based latex, mostly based on vinyl acetate and ethylene. It dissolves in water easily and quickly forms latex.
Protective colloid Polyvinyl alcohol
Additives Mineral anti-block agents
Specifications
| Appearance | white powder, free-flowing |
| Solid content | ≥98.0% |
| Ash content | 10%±2 |
| Bulk density | 450−550 g/l |
| Average particle size | ~80 μm |
| pH value | 5.0-7.0 |
| Minimum film-forming temperature | 0℃ |
| Tg | 3℃ |
Application range
- Skim coat (Putty)
- EIFS system mortar
- Tile adhesive/ Tile joint filler
- Self-leveling mortar
Key properties
- Supply high flexibility
- Increase adhesion strength
- Improves workability
- Improve water proofing of mortar
- Reduce water absorption
Packing, storage& transportation precautions
a) Packing:
- Inner polyethylene film bag and outer plastic coated triad compound bag
- 25Kg each bag;
b) Storage& Transportation:
-No damage during the transportation.
-Protect from humidity, rain, sunlight, damp and wet.
-Put in dry and ventilated place During storage.
- Remainder must be promptly sealed and packed to prohibit from wet.
Re-Dispersible Latex Powder
Latex Powder,Re-Dispersible Latex Powder,Re-Dispersible Polymer Powder,Redispersible Emulsio Powder
Hebei pancan trading co. LTD , https://www.hbpancanshangmao.com