We have to find out about many aspects of the size of the cabinet, then the size of the cabinet process is kind of how it? How can we measure the size of the cabinet? Today, with the small series to specifically understand the size of the cabinet and the cabinet size of the process of measuring time for your reference.
First, the measurement process of the cabinet
1. Measure the distance from the left side of the window to the left wall
2. Measure the distance from the right side of the window to the right side wall or pillar
3, measure the height of the window
4. Measure the height of the sill from the ground
5, measuring height
Second, cabinet measurement considerations
1, the selection of materials should pay attention to the selection of high-quality sheet, pay attention to environmental protection, bearing the weight, not easily deformed, holding nails, easy scrubbing and other issues.
2, pay attention to veneer, edge and other details of the construction site.
3, pay attention to the installation of hardware accessories.
4, as much as possible to simplify the production line, pay attention to modeling.
5. Pay attention to the details of the internal hydropower facilities, such as the concealment of pipelines, the use of space, etc.
Third, the cabinet measurement details
1. When measuring the length, it is best to measure twice, from left to right and from right to left, so as not to read the wrong size for the first time.
2. When measuring the ceiling height, measure the quasi-high points in several different directions, and at the same time, see if there are no beams under the gusset plate.
3, the measurement depends on the waist line, the height of the mobile socket to the floor, at the same time, depending on the window height (more when retesting, measurement should pay attention).
4. Measure the distance and height from the gas meter and the pipe to the wall, the height of the flue, the height of water in and out, the head of the drainage, the distance from the wall, and the height of the socket (retest).
5, when the measurement depends on whether there are steps on the ground, the wall has no bumps and beams, when the edge of the window to do wall cabinets to consider the pull of screens, such as the relevant to the cabinet to measure the relevant size.
6, when the re-test to brick shop, wall stickers, such as hanging cabinets or high cabinet to the top of the ceiling to be re-tested.
7. It is better to select the fixed point and the diagonal line when measuring irregular or polygonal shapes, and to measure the distance between the outside and the outside when facing the wall to make the cabinet (ground, wall cabinet).
8. When there are poor bricks, the distance and height from the wall to the wall (including the height from the bottom and the top to the ground) should be measured. The normal refrigerator should preferably be 700mm long, and special additional length should be added.
9, where there is a door cover to measure the thickness of the door cover and good (including lines), or a sliding door, hanging cabinet to open and pull the door and to leave 10-20mm gap.
10, such as the unit of measurement of the kitchen, you should pay attention to ask whether the wall is a stone wall, so as not to install the wall cabinet.
Fourth, the overall measurement time of the whole cabinet
After the construction of the renovation site is completed, the designer of the cabinet company should make the first measurement before the hydropower reform. The purpose is to design the specific functions and layout of the cabinet and provide the water and electricity plans. The decoration and construction party will follow their water and electricity layout. Lines for future use.
Suggestion: At this time, you have a preliminary idea of ​​the kitchen, especially what electrical appliances you plan to put on, what kind of hood, etc. can communicate with the designer, so that the designer reserved power outlets, but also can discuss with the designer about personal ideas and the whole Decoration style and so on.
Fifth, do not forget the secondary measurement time of the whole cabinet
After the completion of the paving tiles, a second survey of the cabinet designer's door is re-scheduled, mainly to check the specific dimensions of the cabinet and to understand the owner's pre-kitchen decoration details. After the second measurement, you need to submit the cabinet company to determine the placement of electrical appliances, hood model, sink, stove opening size; In addition, the cabinet color, handle style, etc. must be determined one by one, will not be able to change after the order .
Information on the size of the cabinet was introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Kitchen Cabinets Kitchen Cabinets Custom Cabinets Style Kitchen Wall Tiles Cupboard Doors Kitchen Doors Tiles Tiles Kitchen Tiles
3 Phase Rebar Cutting Machine, this machine should be 3phase 380V/220V/440V. The motor should be confirmed as customer's local requirement.
Rebar Cutting Machine also can apply single phase as customer's requirement.
3phase rebar cutting machine can be applied to cut the normal common carbon steel rod, hot rolled steel, deformed steel, flat steel, square steel, and angle steel in machine processing and construction projects.
3 Phase Rebar Cutting Machine
Rebar Cutting Machine,Electric Rebar Iron Cutting Machine,Circular Saw Rebar Cutting Machine,Cheap Rebar Cutting Machines
BAODING JINDI MACHINERY CO., LTD , https://www.rebarconnector.com