How to arrange the living room switch socket?

The decoration in the living room is rather cumbersome, so large to choose furniture, wall decoration, etc., as small as the living room switch sockets need us to check, the big side of the living room decoration everyone is better to grasp, today Xiaobian will come to talk to you: how to When setting up the switch socket in the living room? When the living room switch socket is arranged, what issues should I pay attention to? Next, let's take a look.

1. Where are the layouts of the living room switch sockets?

1) Living room switch layout

1. If it is a multi-connector switch, it can be arranged on the wall in the direction of opening the door to control the lighting, spotlights and decorative lights of the living room;

2. Place a dimmer switch next to the sofa to adjust the brightness of the living room.

2) Living room socket layout

1. Select 3 sets of switch sockets (four holes / five holes). Because in the living room, there are indispensable equipment such as video walls, televisions and home theaters;

2. Select one with switch socket (three holes / five holes), according to the position of the appliance. For example, in the future where air conditioning needs to be installed, be sure to arrange one;

3. One three-hole/multi-function socket. It can be placed next to the sofa for the needs of the electric fan;

4. One five-hole socket. Put it on the corner of the sofa or at the corner of the living room to prevent the need for a floor lamp in the living room at home;

5. One five-hole socket. A child phone next to the sofa or at the corner of the living room is needed;

6. One three-hole socket. At the corner of the sofa or at the corner of the living room, if the drinking water in the living room is already placed, it is reserved for it;

7. 1-2 five-hole sockets. It is mainly placed on the side of the sofa or on the side wall, reserved for temporary household appliances (mobile phone charging, etc.).

How to arrange the living room switch socket? Figure 1

2. What is the layout specification for the living room switch socket?

1) Height

1. Electric control switch: The power switch is preferably between 120~135 cm from the ground (the height of the main switch and the adult shoulder height);

2. The height of the power socket of the audition equipment, table lamp and terminal block on the wall is generally about 30 cm from the ground;

3. The air conditioner and exhaust fan outlet are about 190~200 cm.

3. What should be paid attention to in the layout of the living room switch socket?

1. The general living room switch adopts the opposite direction and is opened and closed with one hand. Therefore, most household switches are installed on the left side of the door, which is convenient for switching and the behavior is logical.

2. Consider wall-mounted LCD, inlet lighting sockets and corresponding control switches.

3. Consider the use of the room vacuum cleaner, special satellite power outlets, etc.

4. Reserve more power outlets for the expansion of electrical appliances in the future.

How to arrange the living room switch socket? Figure 2

The above is a general introduction of how to arrange the switch socket of the living room. Although the switch and socket of the living room are insignificant compared with the whole decoration, it is closely related to our daily life. We should not relax our vigilance, so we need to understand the layout of the switch socket.

A bench-scale study was conducted using water from a drinking water treatment facility on Lake Ontario to investigate water quality and disinfection impacts of chlorine contamination in a chlorine dioxide solution applied for primary disinfection. Levels of chlorine contamination were varied between 0% (Pure Chlorine Dioxide) and 20%, with a chlorine dioxide dose of 1 mg/L. The chlorine did not significantly affect the rate of chlorine dioxide decay in the water. The chlorine reduced chlorite formation, but led to a corresponding increase in chlorate formation. Trihalomethane and haloacetic acid concentrations varied with the amount of free chlorine present in the chlorine dioxide solution. Levels of Bacillus subtilis endospore inactivation were similar for solutions containing pure chlorine dioxide and a 20%:80% chlorine:chlorine dioxide mass ratio (for the same total chlorine concentration). Since chlorine alone has been reported to be very ineffective against these endospores, the results suggest that the disinfection effectiveness of the mixture was greater than the effectiveness predicted from each of the two disinfectants acting alone.

Swimming Pool Water Disinfection

Clo2 Spa Water Disinfection, Bath Water Bacteria Disinfection, Water Disinfectant Chemicals For Swimming Pool, Swimming Pool Water Disinfection

Nanjing Ligong Shuifu Environmental Protection Technology Co.,Ltd. , http://www.watermanclo2.com