The saw blade is a steel strip with a toothed edge and the toothed edge is the main part of the saw.
classification
Double metal saw blade
A saw blade welded from two metals, specifically a carbon steel saw body and a high speed steel saw tooth. Used to cut pipe fittings, solid bodies, wood, plastic and all machinable metals. Compared with single metal saw blades, it has higher heat and abrasion resistance and longer life. It is flexible and can effectively avoid breakage and breakage during cutting.
Carbonized sand saw blade
Used for cutting glass, hardened steel, stranded fiber and ceramic tiles. It is extremely resistant to heat and abrasion and can cut all other saw blades or saw blades that cannot be cut.
The cutting hard alloy can reach 300mm/min, the cutting marble can reach 100mm/min, and the cut diamond can reach 40mm/min, which is dozens of times the efficiency of traditional reciprocating saw or wire cutting, and the slit is narrow (only 1.2mm~) 2mm), compared with the traditional reciprocating saw and circular saw, it can save 6~10 times of original food, which can bring significant economic benefits to users. These advantages are traditional reciprocating saws, which are unmatched by circular saws.
High speed steel saw blade
Used to cut pipe fittings, solid bodies, wood, plastic and all machinable metals. The saw blade has a higher hardness than other high speed steels. It is flexible and suitable for use with a low tension saw frame. The center of the back of the saw band is not hardened to avoid cracking during the cutting process.
Carbon steel saw blade
Used to cut pipe fittings, solid bodies, wood, plastic and all machinable metals. Low cost and relatively versatile.
So how do you choose a saw blade for a band saw?
First, the life of the same band saw blade is mainly determined by a suitable depth of the knife, and the depth of the knife is determined by the size of the saw band saw, the cutting speed (the speed of the saw band), the cutting force (the cutting speed of the saw bow), and the cutting pressure. .
Second, the size of the band saw blade saw - the saw blade tooth saw is too large and the number of teeth is small, the cutting will be unstable, and because the cutting load of each saw tooth increases, it is easy to cause the saw tooth to be toothed and collapsed.
Third, if the band saw blade saw blade is too small, the sawdust clogging phenomenon is easy to occur, and wear and damage appear shortly after use. When cutting a tough and soft workpiece, use a coarse sawtooth saw band. If you want a good cut surface, choose a fine sawtooth band saw blade.
Concerned about surprises
Label: Classification and selection of saw blades for band saws
Previous: Screw tapping classification Next: Failure analysis of die casting mold
carbide Twist drill are the most common type of drill bit and are used for everyday drilling in all types of material. They are also the most confusing due to the sheer number of size, tip, and material specifications.
hese are the most common Twist Drills and are a good compromise between length and strength
The range of high-precision solid Carbide Drills makes OPT one of the world's leading tool manufacturers. OPT high performance drills are available with or without internal cooling. They are delivered with modern
coatings (including diamond coatings) which are adjusted to each material, which results in vast tool lives. By means of their optimization for various purposes, the drills build a product range which enables economic drilling for a broad spectrum of applications.
Solid carbide drills by OPT are designed especially for metalworking of steel, stainless steel, hardened steel < 70 HRC, titanium, inconel, aluminum and GRP/CRP. All solid carbide drills with diameters up to 3 mm and drill depths from 8 x D are provided with a polished flute as well.
Flexible in order quantity:
Samples can be provided before mass production, and MOQ can be discussed accordingly.
PRODUCT DETAIL:
PRODUCTING PROGRESS:
PAYMENT AND DELIVERY:
PRODUCT EQUIPMENT :
ABOUT US :
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,
We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.
Our best selling of cutting tools include PCD Inserts, PCD End Mill , PCD Ball Nose Mill, PCD Reamer , Carbide Taps, Carbide End Mill , Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.
quanlity control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.
Twist Drills,Carbide Twist Drills,Carbide Tipped Drill Bits,Carbide Twist Drill Bits
OPT Cutting Tools Co., Ltd. , https://www.optdiamondtools.com