Floor paint is a business environment for the company to improve the appearance of the factory floor and to improve the environment.
Epoxy floor paint
Reducing the effect of dust and ground moisture, Epoxy floor, Epoxy anti-static floor, Emery wear-resistant floor, ESD wear floor, Self-leveling cement floor, Heavy-duty anti-corrosion floor, Self-leveling hardener floor construction.
The workshop floor paint has high strength, wear-resistance, and beautiful floor. It has the advantages of no joints, solid texture, good chemical resistance, anti-corrosion, dust-proof, convenient maintenance and low maintenance cost. According to different application requirements, a variety of solutions can be designed, such as thin layer coating, 1-5mm thick self-leveling floor, non-slip and wear-resistant coating, mortar type coating, anti-static and anti-corrosion coating. Therefore, it is widely used in factories, computer rooms, warehouses, laboratories, wards, operating rooms, and workshops.
Selection method
The selection of the floor paint is very important. If it is improperly selected, it is easy to scratch, easy to wear, easy to delaminate, etc.
Floor paint
The general selection method is as follows:
First, mechanical performance requirements
The following three main areas:
1. Abrasion resistance: What vehicles will the floor use when it is in use?
2. Pressure resistance: How much load will the floor bear during use?
3. Impact resistance: Does the impact force cause surface peeling?
Second, the chemical performance requirements
Mainly consider the following two aspects:
1. Acid and alkali resistance: The type and concentration of corrosive chemicals used.
2. Solvent resistance: Solvent type and contact time when used.
Third, the floor position
According to the position of the floor on the ground floor or on the ground floor, is it necessary to determine whether moisture treatment or special moisture-proof floor is required?
Fourth, the basic situation
1. Base strength: General requirements compressive strength ≥ 20Mpa
2. Flatness: Does it need to be repaired with epoxy mortar?
Fifth, aesthetic requirements
1. Color requirements: Does it require color division?
2. Brightness requirement: Choose matte or light? 3. Flatness requirements: Is there a requirement for the flatness of the floor?
Six, fire flowers and anti-static
On some occasions there is a need for floor.
Seventh, safety requirements
If the floor is in an oily environment or on a slope, you need to choose a non-slip floor.
The floor paint is suitable for places with relatively high requirements for sanitary conditions such as the hospital floor, the food factory floor, the pharmaceutical factory floor, the laboratory floor, the machine room floor, etc.; and the floors that require anti-corrosion, anti-corrosion and wear-resistance, such as underground. Parking lot, factory warehouse (over forklift), etc.
Construction industry: The floor is the part of the lower floor of the building that is in contact with the lower layer. It bears the ground load of the low-rise room and must have good wear-resistance, moisture-proofness, waterproofness, and thermal insulation properties.
Epoxy floor paint
Reducing the effect of dust and ground moisture, Epoxy floor, Epoxy anti-static floor, Emery wear-resistant floor, ESD wear floor, Self-leveling cement floor, Heavy-duty anti-corrosion floor, Self-leveling hardener floor construction.
The workshop floor paint has high strength, wear-resistance, and beautiful floor. It has the advantages of no joints, solid texture, good chemical resistance, anti-corrosion, dust-proof, convenient maintenance and low maintenance cost. According to different application requirements, a variety of solutions can be designed, such as thin layer coating, 1-5mm thick self-leveling floor, non-slip and wear-resistant coating, mortar type coating, anti-static and anti-corrosion coating. Therefore, it is widely used in factories, computer rooms, warehouses, laboratories, wards, operating rooms, and workshops.
Selection method
The selection of the floor paint is very important. If it is improperly selected, it is easy to scratch, easy to wear, easy to delaminate, etc.
Floor paint
The general selection method is as follows:
First, mechanical performance requirements
The following three main areas:
1. Abrasion resistance: What vehicles will the floor use when it is in use?
2. Pressure resistance: How much load will the floor bear during use?
3. Impact resistance: Does the impact force cause surface peeling?
Second, the chemical performance requirements
Mainly consider the following two aspects:
1. Acid and alkali resistance: The type and concentration of corrosive chemicals used.
2. Solvent resistance: Solvent type and contact time when used.
Third, the floor position
According to the position of the floor on the ground floor or on the ground floor, is it necessary to determine whether moisture treatment or special moisture-proof floor is required?
Fourth, the basic situation
1. Base strength: General requirements compressive strength ≥ 20Mpa
2. Flatness: Does it need to be repaired with epoxy mortar?
Fifth, aesthetic requirements
1. Color requirements: Does it require color division?
2. Brightness requirement: Choose matte or light? 3. Flatness requirements: Is there a requirement for the flatness of the floor?
Six, fire flowers and anti-static
On some occasions there is a need for floor.
Seventh, safety requirements
If the floor is in an oily environment or on a slope, you need to choose a non-slip floor.
The floor paint is suitable for places with relatively high requirements for sanitary conditions such as the hospital floor, the food factory floor, the pharmaceutical factory floor, the laboratory floor, the machine room floor, etc.; and the floors that require anti-corrosion, anti-corrosion and wear-resistance, such as underground. Parking lot, factory warehouse (over forklift), etc.
Construction industry: The floor is the part of the lower floor of the building that is in contact with the lower layer. It bears the ground load of the low-rise room and must have good wear-resistance, moisture-proofness, waterproofness, and thermal insulation properties.
At present, Liang metalworking Tools Co., Ltd. has more than 200 employees, who have undergone professional technical training and rich production technology experience. The company has self-supporting import and export rights, and more than 90% of its products are exported to Italy, More than 60 countries and regions, including Spain, the Netherlands, Poland, Russia, Nigeria, India, Iran, South Africa, Japan, Brazil, ELDOR, etc
Rubber Tape Measure,Nylon Coated Steel Tape,Wear Resistant Steel Measuring Tape,Dirt Resistant Steel Measuring Tape
Henan Liangjin Tools Co.,Ltd , https://www.jtapemeasure.com