With the advent of the renovation season, the owners who are going to decorate have entered the actual stage of selecting decoration companies and purchasing building materials. At home, it is inevitable to involve the paving of floors, tiles, and the like.
During the renovation process, many people will unconsciously look up at the ceiling and observe the wall at a close distance. They think that this is the most important facet project, but often neglect the work under the feet, because most people think that there is a floor, Not much emphasis on a floor tile. However, problems were discovered after waiting for the paving and it was very troublesome to solve it again. In fact, according to professionals, in the spring renovation, there are many places worth paying attention to.
Whether it is paving wood floors or tiles, ground waterproofing should be done carefully.
<<<Link: DIY Home Improvement: Laying Tiles Floor Raiders
The floor of the cold floor is prone to trouble due to the large temperature difference between day and night in the spring, so the floor and floor tiles should pay attention to the damp, the moisture from the material and other issues. When choosing the floor, you should pay attention to the moisture content of the wood, especially the solid wood floor. If the water content is high, the water will disintegrate after the floor water is lost.
In addition, as a traditional way of installing wooden floors, the keel method leaves an overhead layer between the floor and the floor. It is not easy for the moisture in the keel and inadvertently infused beverages, milk and other liquids to evaporate, and it is easy to breed bacteria and insect pests. The viscose installation method and metal keel installation method can avoid the disadvantages of wood keel installation. The viscose method uses environmentally friendly floor glue to glue the floor blocks directly to the cement floor, eliminating dust and wormholes under the floor. In recent years, the most popular lock-type flooring can not only be glue-free paving, the seams on the floor are very tight, and it can be repeatedly disassembled and reused several times.
Do not touch the floor for 48 hours after quality inspection pavement
Remind the majority of the owners to pay attention to the three steps of the pre-paving surface treatment, wood floor pavement and tile pavement during the paving of the ground.
Ground treatment before pavement: First, clean the floor. Ensure that the ground is flat, dry and clean. Second, waterproof moisture treatment. The waterproof coating should be applied evenly. The joints should be filled with paint or cement brush, and a water-resistant coating with a height of 30 cm should be applied close to the water pipe. Third, if the ground environment is too moist, you should use pearl cotton bottoming, while the back of the floor should also be coated with a layer of moisture protection paint.
Wood floor pavement Note: First, the wood floor water content should be about 11%. Second, after the floor is bought home, it is best to store it at room temperature between 16°C and 18°C ​​for two days. Third, about 1 cm of floor expansion joints should be reserved between the floor and the wall.
Tile pavement considerations: First, pay attention to the water content of the tiles. The surface is smooth and delicate, and the back feels soft with a suitable moisture content. Second, pay attention to the difference between tile ceramics and porcelain. The percussion sounds crisp and clear is a porcelain brick with a low water absorption rate, and the percussive sound is a clay brick with a high water absorption rate. Spring decoration should use porcelain tiles with low water absorption.
In addition, avoid moving and placing heavy objects within 48 hours of floorboarding to allow enough time for the glue to stick. Freshly-laid floors are best cleaned with a vacuum cleaner or broom.
Experience talk about wood floors do not use acid liquid cleaning
Mrs. Ho, housewife
If the floor has stains, it must not be cleaned with strong acid-base liquids. In my experience, clean light-colored composite wood floors. You can use a rag to dip clean the rice water directly on the floor, or evenly spray the rice water on the floor and wipe it with a dry rag after 5 minutes.
If you encounter oil stains, paints, inks and other difficult to clean the stains, you can make special stains oil wipe; if it is blood stains, juice, wine, beer and other residual stains, you can use a damp cloth or use a rag to wipe a proper amount of floor cleaner.
Paving tiles should keep the cement away from water <br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br> Ceramic tiles in spring also pay attention Since the tiles are dry products, if the tiles are not well handled on rainy days and the weather is dry, the cement absorbs the surrounding moisture and will cause the tiles to bounce or burst. Therefore, before laying the floor tiles, it is best to cover the surface of the cement with kraft paper or plastic cloth, and try to keep it away from the water source to prevent it from getting wet or condense into pieces. In addition, after paving the floor tiles, you can not step on them immediately.
Pavement Flooring Coatings Home Improvement Paints Home Improvement Decoration Decoration Decoration Company Floor Tiles Tile Floor Tiles
Stainless Steel Tee,Stainless Steel Elbow,Stainless Steel Reducer,Stainless Steel End Cap
,Square Pipe Steel Tubes CO.,Ltd , http://www.ns-pipefitting.com