Paint on the wall Note 1: Prepare
Door and window frame protection is good: the door, window frame, furniture and paint joints, paste color separation paper protection. Furniture such as wooden cabinets and partitions should be sealed with newspapers to prevent the paint from dripping and staining the furniture.
Care should be taken in the coloring of paints: walls with color requirements should be accurately calculated in advance, and the materials used should be evenly distributed at one time.
The wall primer is applied well: the wall should be primed before painting to prevent the wall from becoming damp, so that the color of the top coat is even, and the water stains on the wood board are prevented.
Note on the paint wall: the construction details are not too small
Roller painting: Topcoat construction sequence: first ceiling, line, back wall. The paint should be applied to the wall at least twice. The first coat can be added with 5-10% water to facilitate the wall absorption. The second coat can be filled with no water, and there is a certain interval between the first coat and the coating.
Construction tool tips: When rolling, you need to use two kinds of roller brushes at the same time. The coarse roller brush first and the fine roller brush will follow. Use a thick roller to spread the paint evenly on the wall, then use a fine roller to brush the place where the thick roller is brushed, and then re-brush it to make the wall paint fine and brush out the desired pattern. Note that when rolling, do not stick too much paint on the roller, the rolling pressure should be uniform and the speed should be moderate. The horizontal, vertical, and oblique directions must be evenly rolled.
Automatic Sensor Faucet,Sensor Kitchen Faucet,Sensor Kitchen Mixer
Wenzhou Wuhuang Sanitary Ware Co., Ltd , http://www.chbasinfaucet.com