With the improvement of people's economic level, the owners have more and more requirements for their own house decoration. Because most of the decoration companies on the market today are indiscriminate, many owners choose to do their own house renovation. So, what is the rough house decoration process ? Here we take a look at the key steps to decorate the house!
Blank room renovation process 1, volume room
Whether it is a second-hand house or a rough house, you must go through this step. However, the rough room needs to pay attention to the accuracy of the data, because it will determine the overall pattern of home improvement.
Blank room renovation process 2, dismantling and reform
The demolition of the rough house is simpler than the second-hand house. When the house is demolished and changed, it can allow cabinet manufacturers to measure the size. At the same time, they can first buy stoves and hoods.
Blank room decoration process 3, hydropower reform
Hydroelectric reform is an extremely hidden project, so owners must go all out to control every detail. For example, if you want to pay attention to whether the position of the water inlet and outlet is reasonable, whether there are reserved sockets for slotted wiring, etc., then you can do waterproofing.
Blank room decoration process 4, Bao Liguan
The bag riser means that all the vertical pipes in the house are wrapped. It is best to use red bricks, which is not only beautiful but firm.
Blank room decoration process 5, wall tiles, floor tiles
Under normal circumstances, after paving the wall tiles, you can pave the floor tiles, which is beneficial to the entry and exit of construction materials. However, before sticking the wall tiles, remember to soak the water first, and remember to leave the joints at the same time so as to avoid empty drums, thermal expansion and contraction.
Blank room decoration process 6, wall decoration
Painters and carpenters can work together. However, owners must remember not to paint too much paint, as this will cause the wall to be too thick and eventually crack.
Blank room renovation process 7, socket installation
Owners can decide where sockets are reserved according to their needs, such as the installation of microwave ovens and rice cookers in the kitchen. It should be noted that the socket installed in the bathroom should remember to have a waterproof cover.
Blank room decoration process 8, kitchen installation
Sinks, cabinets, hoods, etc. can be installed along with kitchen ceilings. However, it should be noted that the hood of the hood is shorter in order to prevent future jams.
Blank Room Decoration Process 9, Flooring
Before the floor is laid, it is necessary to do a good job of "ground leveling", otherwise there will be hollowing, cracking and other phenomena.
Blank room decoration process 10, paste wallpaper
The most important thing is to choose environmentally friendly wallpaper wallpaper glue. Because the formaldehyde content of the glue is very high and it is not volatile, it will cause certain harm to the health of themselves and their families.
Blank room renovation process 11, first cleaning, furniture re-arrangement
After the cleaning work is done, the furniture can be brought into play. But when the furniture is all done, it needs to be cleaned again.
Editing summary: What is the rough house renovation process ? I believe that after everyone has browsed the key steps in the renovation of the house, they are all aware of it! Because each owner's needs and economic capabilities are different, the above rough house renovation process is for reference only. For more relevant knowledge, you can always pay attention to our website!
Mild steel, sometimes referred to as carbon steel or ordinary carbon steel, is defined as having a carbon content of no more than 2% and no other perceptible alloy elements.
This steel is produced on a large scale and is the largest part of the steel production industry. You will be able to find it in various applications, fasteners and fasteners.
Generally, this kind of steel has high strength, high hardness and magnetism, and is usually used in motors and electrical appliances - however, their corrosion resistance is poor, and should not be used in corrosive environment without protective coating or coating.
There are some differences between low-carbon steel and steel, because steel has lower toughness and greater brittleness, and low-carbon steel can be further strengthened by adding carbon.
If you need more information or want to order carbon steel products, such as hexagon Bolts, carriage bolts, flange bolts, U-bolts, union bolts, expansion bolts, threaded rods, please contact us.
Carbon Steel Bolts,High Carbon Steel Bolts,Bolt Carbon Steel,Carbon Steel Fasteners
Taizhou Hongchuang Hardware Co., Ltd. , https://www.taizhouhongchuang.com