When the knife is first applied, use gas or WD40 cleaning agent to clean the collet and pressure cap, and be sure to check whether the collet and the selected tool match before clamping. Otherwise, the tool cannot be tightened.
The chuck and the pressure cap must be clamped. The chuck cannot be tilted inside the pressure cap! In the beginning of the work money to check whether the tool is tightened. One thing to note when unloading a knife is to use an air gun to remove the debris from the pressure cap and rotor shaft and then unload it.
The above is a summary of some points we hope to help you!
STAINLESS STEEL PRODUCTS
Stainless steel is a corrosion resistant steel alloy with a minimum of 10% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present. The chromium creates an invisible passive film of chromium oxide that will not let oxygen attack the surface and prevents rusting of the iron base.
Yuhong Group is a stainless steel manufactory of more than 20 grades of Stainless Steel.
Stainless Steel Welded Pipe,Industry Stainless Steel Welded Pipe,Welded Stainless Steel Coil Pipe
YUHONG GROUP CO.,LIMITED , http://www.alloypipeline.com