Editor's Note: With the continuous improvement of people's living standards, in the decoration process, the requirements for the decoration of the bathroom or bathroom are getting higher and higher. How to reflect its comfort and safety has become a focus of decoration. In this issue, let's take a look at the details that need to be paid attention to when decorating a bathroom or a bathroom.
When interviewing the home improvement industry, the reporter learned that the decoration of the bathroom involved a lot of details in the home decoration. If it is not handled well, it will not only directly affect the quality of home life in the future, but also affect the mood. Bathroom decoration should pay attention to the following points:
First, the ceiling: Because the water vapor in the bathroom is heavier, so choose materials that have the characteristics of waterproof, anti-corrosion and anti-rust.
Second, the ground: Before laying the floor tiles, be sure to do waterproof; after the tiles are laid, it is necessary to ensure that the brick surface has a water discharge slope (usually about 1% is appropriate), the slope is facing the floor drain;
The ground must be closed after the laying of the tiles, the time must be at least 24 hours; when laying the floor tiles, pay attention to the seams and alignment with the wall tiles to ensure the overall sense of the entire bathroom, so as not to create a visual impression.
Third, the wall: the tile on the wall should also be moisture-proof and waterproof, and it should be flat when tiling, and should be seamed and aligned with the floor tile to ensure the overall feeling of the wall and the ground; The cut of the tile should be small and appropriate, and the flange cover on the water heater can be easily covered to make the appearance perfect.
Fourth, doors and windows: the bathroom is best to have windows for ventilation; if there is no window, pay special attention to the details of the door. In order to prevent the water from overflowing in the bathroom, the door boundary should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept larger to facilitate the return air; if it is a sliding door, the sliding door and the bathroom should be Make a layer of waterproof between the tiles.
Fifth, the circuit laying: the wire joints in the bathroom must be tinned, and must be wrapped with waterproof tape and insulating tape to ensure safety; the wire body must be covered with flame retardant pipe; all switches and sockets must have moisture-proof box, and the position It depends on the size and location of the appliance to ensure convenient and reasonable use.
Sixth, the waterway transformation: the water supply and drainage lines between the bathrooms should not be changed too much, if you want to change, depending on the specific circumstances, such as the different models of the washing machine, the location of the water will be different.
Seven, sanitary ware installation: It is best to remember the distance of the water hole before the decoration, according to the size of the bathtub, bath room, toilet, wash basin and other sanitary ware, so as not to be unsuitable in the decoration; toilet installation must first sit The mud is sealed and then fixed with expansion screws or glass glue, which is easy to repair when the toilet is blocked.
8. Ventilation and ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must have a reverse gate to prevent the dirty air from flowing backwards.
9. Greening: Adding anger. The bathroom should not be a corner forgotten by the green. During the decoration, you can choose some shade-resistant and wet pots to be placed in the bathroom, which makes the place a little more angry.
Summary: In fact, not only the bathroom, in the process of decoration, in order to make our home perfect, we need to pay more attention to the details, but also to understand the traps in the home improvement.
XINLE CITY VAST PLASTIC C.,LTD is a professional manufacturer of PVC Roll Flooring and SPC interlocking flooring.The factory locates in the Mucun industrial area,Xinle city,Hebei province.It covers an area of 170000m2,and has a staff of more than 400.In 2015,based on 2m width PVC Flooring .
The products include 4 meters width pvc flooring,the residential flooring,the sponge flooring and the Commercial PVC Flooring,totally 68kinds of products.about 1000designs for your reference.the thickness of products from 0.35mm to 5mm,width from 1.83m to 3.75m.
The company sticks to quality first,focuses on innovation,bases on the market for development,serves diligently for customers with efficient and high quality,aims to exporting to Europe,America,Middle Asia,South-East Asia and Africa,etc.
We sincere welcome every friend to factory for filed trip.
Commercial Flooring thickness mainly is 0.8mm,1.0mm,1.2mm,1.4mm,1.6mm,1.8mm,2.0mm.the quality is very good,it oftenly use in office,workshop,and some heavy duty area commercial use.
1.4mm thicknees commercial flooring,best selling size is 1.4mm*2m*20m,1.4mm*2m*25m,1.4mm*2m*18m,1.4mm*1.83m*25m,1.4mm*1.83m*20m,etc. also can put customer's company label.
1.4MM Commercial Flooring ,Vinyl Commercial Flooring,Marble Color PVC Flooring,Wooden Type SPC Flooring
XINLE CITY VAST PLASTIC CO.,LTD. , http://www.bodaflooring.com