Fluorescent lamp cleaning and maintenance tips

Speaking of fluorescent lamps, everyone is not unfamiliar. This kind of electric light source that uses the ultraviolet light generated by the low-pressure mercury vapor discharge to excite the phosphor coated on the inner wall of the tube and emits light is now very common in our lives. So how do you carry out fluorescent lighting for maintenance?

1. Do not switch the lights too often. Too frequent lighting will cause the two ends of the lamp to darken prematurely, affecting the output power of the lamp, and it should be noted that it takes 5-15 minutes to restart the lamp after turning off the light.

2. If the voltage is very low, the two stages of the lamp will emit tungsten at the beginning of the lighting, which will cause many point-like pollutants inside the lamp to become one of the causes of lamp damage. Therefore, it is recommended to try to Turn on the light under high voltage conditions.

3, fluorescent lamps have more lines, need auxiliary devices, so must be used with the corresponding transformers, capacitors, etc., to ensure that the lamp is activated to the appropriate power.

4, pay attention to maintain a ventilated environment, not only to take away dust, but also to reduce the temperature of the lamp, in order to extend the life of the lamp.

How do you clean fluorescent lights?

1. Fluorescent lamp is easy to attract dust. When preparing to clean, turn off the power, then let the indoor air circulate as much as possible. Wipe the lamp gently with a smudged rag and a little detergent. Then use a clean dry cloth to clean the detergent. Wipe clean.

2. If conditions permit, use anti-static tweezers to remove dust from the surface of the lamp, and then wipe the dirt with a dry rag. Do not use too much force.

3. Regularly clean the blower fan blades of the fluorescent lamp. You can take it out and wash it, then wipe the water with a dry cloth to keep the fan blades dry and install.

4. When cleaning the lamp, use a paper towel to clean your hands. Do not leave any marks on the lamp. You can also wipe the surface of the lamp with alcohol to keep it clean.

Basin Faucet

Antique Brass Faucet,Antique Color Tap,Basin Faucet

Automatic Faucet Shower Series Co., Ltd. , http://www.sinyo-faucet.com