Jingdezhen ceramic vase production process and placement

Ceramic vases should be placed on the display. Why? Because the correct placement can show the nobleness of a large vase, it can bring harmony to the surrounding environment. Large vases occupy an important position in the history of Chinese interior decoration, because "bottle" and "flat" are homophonic and have the meaning of peace, wealth and harmony. What's so special about the ceramic vase ? Jingdezhen ceramic vase in Jiangxi where to sell? For those who have this need, it is one of the topics that deserves close attention. Here I come to reveal the answer for everyone.

Jingdezhen ceramic vase production process: casting

Pulling is a process of porcelain production. The mud to be smelted is placed on a wheeler, and the mud is pulled into the billet with both hands by the force of rotation. Pulling blanks is a traditional method for the production of China's ceramics, and all rounds are shaped using the drawing method. Jingdezhen kiln is divided into two sizes, the largest one is made of one foot to two or three feet, and the small one is made of small pieces below one foot.

A process of porcelain production. The mud to be smelted is placed on a wheeler, and the mud is pulled into the billet with both hands by the force of rotation. Pulling blanks is a traditional method for the production of China's ceramics, and all rounds are shaped using the drawing method. Jingdezhen kiln is divided into two sizes, the largest one is made of one foot to two or three feet, and the small one is made of small pieces below one foot. The use of blanks: After unpacking, take a mass of mud (more than 2 kg is recommended) to knead the mud (see the relevant information for the method of rubbing the mud). If the water content of the mud is lower than 23% and its hardness is relatively high, water can be properly added to control the water content of the mud between 24% and 25%. Then the billet is formed. (See the relevant information). After the billet is finished, if the water content is higher than 25% or more, the mud that can not be formed by casting again can be dried after being dried to 23~25% of moisture. Drawing is one of the 72 processes used to make ceramics. It is also known as billet. It is the initial stage of forming and is also the prototype of artifacts. It is to put the prepared mud on the blank car and make it into a blank with a certain shape and size by the wheel molding method. Before the billet is drawn, it is necessary to take out the old mud in the mud room and practise it. The first step is to step on the clay, commonly known as "stepping on the lotus pier". Then, by hand rubbing mud, Jingdezhen called "Origami." The main purpose of the operation is to remove residual air bubbles in the mud by hand rubbing and to make the moisture in the mud further uniform to prevent bubbles, deformation or cracking during firing. There are about two ways to knead the mud: one is similar to kneading and the other is muddy. The other is like a sheep's head, commonly known as “shepherd head”. Jingdezhen mostly uses this method. The muddy mud operation is usually carried out on a long bench or flat quartzite (commonly known as the “dock”), and the mud stool is low and high in front of the mud stool, so it is easy to use. The operation is to put a white cloth on the stool surface. The operator rides on the stool with his hands and kneads the mud masses in order to squeeze out the air in sequence. After kneading the shape of the bar, press it up for a second time. This can be repeated several times. Pulling is the first process of forming. Due to the softness of porcelain clay in Jingdezhen and the need for internal and external trimming, the green bodies drawn are thicker than other clays. The billet must not only notice the shrinkage ratio, but it should also pay attention to the shape. According to different stylings, larger products must be drawn in sections. From which part of the site, we can see the master's skill and level.

  

How to pay attention to the large ceramic vase

1. Ceramic vases are placed in relation to feng shui. The southeast corner of the lobby or living room represents the financial position of the entire house. Placing ceramic vases here can bring more wealth. The indoor swing accessory product is preferably of eight shapes, since the seats are adjacent to each other, which promotes the harmony of human relationships.

2. Ceramic vases are placed in relation to the environment. The choice and placement of large vases is influenced by the structure of the house and the environment. For example, in a room with a height of 5 meters in a room, if a large vase of more than 3 meters is placed, it will only appear to be small in space. Usually when the large vase is placed in the doorway of the house, the height of the vase should be shorter than the height of the gate.

3. The placement of large ceramic vases should focus on convenience. In addition to the beautiful appearance of the generous bottle, it is also necessary to pay attention to convenience, more people in the location, must not put porcelain, so as not to be knocked down. Usually, large ceramic vases are not suitable for placement in the center of the room.

  

Jingdezhen ceramic vase in Jiangxi where to sell

Jiangxi Jingdezhen ceramic vase can be ordered to the following manufacturers

A: Jingdezhen Ceramics Factory Address: 268 Xinchang East Road, Zhushan District, Jingdezhen

B: Jingdezhen Tanglong Ceramics Co., Ltd. Address: No. 66, Xiangjiang East Second Road, China Ceramic City, Yingbin Avenue, Changjiang District, Jingdezhen City

C: Jingdezhen Ceramics Co., Ltd. Address: 99 Gaoling Avenue, Changjiang District, Jingdezhen City

Editor's summary: The above is the Jingdezhen ceramic vase production process and placement of the relevant presentations, in the home furnishings, be sure to learn a lot about feng shui common sense, that will give you more good luck. For more information, please continue to pay attention to our website, follow-up will show more exciting content. You can also purchase more of your favorite products on Qijia Mall!

Ceramic vase bedroom entrance vase display technology vase ceramic bathroom cabinet European and American ceramics

Wardmay Smart Home Cameras perfect to help you identify intruders, assist police, and check on pets and kids from anywhere. All Wardmay Smart Home Cameras are high-tech smart electronic wireless wifi security products, which use the Mobile(IOS & Android) APP for real time streaming HD video, free cloud video recording, motion detection, emergency notifications, and work stand-alone.


The mainly products are bellow:

1. 360 Panoramic 2/3MP Smart Home Bulb Camera 

2. 2.0MP IR Bullet Wifi IP Camera

3. 2.0MP Mini Wifi cube IP Camera

4. 1.0MP Wifi Doorbell IP camera

Smart Home Camera

Smart Home Camera,Home Security Cameras,Outdoor Security Cameras,Home Camera System

Shenzhen Wardmay Technology Co., Limited , https://www.wardmaycctv.com