What are the characteristics of epoxy flat coating floor construction?

Speaking of epoxy floor coating may not be very clear to many people, in fact, it is generally in the silk screen factory, paper products factory, warehouse, parking lot, garment factories, printing plants, toy factories, textile mills, beverage plants and other workplaces or light The production area is often used, so what exactly is an epoxy floor ? Next Xiaobian will give you a brief introduction.

[Epoxy flat floor introduction]

Epoxy flat coating floor is a two-component epoxy resin system. After curing, it forms a thin film. The appearance is bright, strong and has a tough, impervious decorative surface, which is convenient for cleaning. Strong adhesion, good adhesion to the substrate; can carry moderate loads. Cost-effective economy, low viscosity, easy construction, seamless dust, oil stain resistance, easy to clean, repair and maintenance simple and convenient. 4 anti-pressure, impact resistance, waterproof and moisture-proof.

[epoxy flat coating floor features]

1Epoxy flat coating flooring is a two-component epoxy resin system. It forms a thin film after curing. It has a bright, strong, tough, impervious decorative surface and is easy to clean.

2 strong adhesion, good adhesion to the substrate; can carry a moderate load.

3 Cost-effective economy, low viscosity, easy construction, seamless dust-proof, oil-resistant, easy-to-clean, simple repair and maintenance.

4 anti-pressure, impact resistance, waterproof and moisture-proof.

[Epoxy Flat Coating Floor Construction Steps]

1. Base surface treatment: The debris on the original ground (such as: cement blocks, paints, etc.) must be completely processed; the smoother base surface should be polished to increase the bond strength between the original ground and Epoxy. Check with a 2m ruler, the high zone is polished with a grinder, and the dust is sucked with a small industrial vacuum cleaner. Surface moisture content of the surface should be less than 8%, unsatisfactory place must use gas grill gun drying and other methods to dry.

2.Roller Brushing Epoxy Primer: Epoxy resin and curing agent are formulated in proportion, and the prepared epoxy resin primer is evenly coated on a clean, dry and rough surface with a flat knife or roller. Natural cure. Curing time is 8 hours (depending on the weather is appropriate. Check the coating conditions of the primer coating, if there is the phenomenon of complete absorption by the ground floor to be recoated.

3. Batch scraping epoxy coating mortar: After the middle coating material is mixed and mixed evenly, the 6th silicon quartz sand is put into the middle coating material according to a certain ratio, stirred uniformly, spread on the ground, and then flattened with a flat blade. Spread over the primer, make it flat and bond with the primer and wait for it to completely cure.

4. Grind the middle mortar layer: Grind the middle mortar layer with all kinds of grinding machines, grind off the blade marks of the mortar layer, jump the knife marks, and dust them with an industrial vacuum cleaner or broom to prepare for the next process.

5. Scrape in the putty putty: Epoxy resin coating to adjust the appropriate putty powder, not lean is not appropriate, with a flat blade scraper putty evenly in the middle coating layer to obtain a smooth and delicate coating Layers, prepare for the top coating.

6. Grind the middle layer of putty: Use various types of sanders to finely grind and polish the middle layer, and use industrial vacuum cleaner or broom to remove dust to obtain a clean surface layer.

7.Roller Brush Epoxy Topcoat: Epoxy topcoat II (scrape together, roll coat) to make the floor dust and water resistant, abrasion resistant, corrosion resistant, and easy to clean. After the completion of the overall ground bright clean, uniform color, no bubbles, no empty drums.

8. Maintenance: Adequate maintenance time is of great help in improving the early strength of the floor, and indirectly affects the service life of the floor afterwards. Please don't use it for self-use during the maintenance period.

Editor's summary: The related information on epoxy floor coating construction procedures was introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.

Floor construction installation and construction delivery bottom how to avoid the renovation of the contract trap decoration construction knowledge

Diamond Electroplated Grinding Wheel

DIY,special

Guanghan Longrun Science and Trade Technology Trade Co., Ltd. , https://www.kairungongju.com