The floor is believed to be familiar to everybody, but there are many kinds of floors, and it is one of them that does not burn and wear . It is more suitable for flammable and explosive products production and storage warehouses. So what are the characteristics of the fire-resistant wear floor ? How should it be constructed? Next we will take a look and see.
[Introduction]
It is composed of quartz sand or corundum, high polymer, and special additive special cement. This product has non-fire and high wear resistance, impact resistance, moisture resistance, decorative, can not afford powder, easy construction, and the impact does not produce sparks or friction.
What are the characteristics of the fire-resistant wearable floor?
1. The floor is not subject to sparks due to friction with metal materials.
2. To enhance the wear resistance and strength of concrete floors, high density, no dust, long-lasting, dense surface will never fade.
3. Prepackaged products do not need to be mixed with other materials.
4. It can resist grease and easy to clean.
5. Integrated with the surface of the newly cast concrete, the construction period is short.
6. Non-metallic aggregates are not rusted in the wet environment, and the floor surface can increase the smoothness after continuous use.
ã€No fire and wear-resistant floor construction procedures】
Concrete construction requirements: According to the design, pouring concrete, elevation to plus or minus zero. The concrete number is not less than C25 and the thickness is more than 5cm.
The first time the material was spattered: The prescribed amount of 2/3 of the wear-resistant material was evenly spread on the surface of the newly set concrete.
The second time pulping: After the wear-resistant material absorbs a certain amount of water, the pulping operation is performed using a machine, and a leveling tool is used to level the slurry.
The third sprinkler: The hardened material on the street was hardened to a certain segment, and a prescribed amount of 1/3 of the material was used for the second time. The slurry was used for mechanical pulping.
The fourth mechanical trowel harvesting: According to the hardening of the floor, using a mechanical trowel to receive light.
The fifth maintenance: the floor is finished light, film maintenance or recommended special maintenance agent maintenance.
Summary: The above is a brief introduction of Xiao Bian's useless floor . I hope to help everyone.
Construction installation decoration construction knowledge construction delivery construction contract
Self-Clean Prepainted Steel /Aluminum Coil
Self-Clean Prepainted Aluminum Coil,Self-Clean Prepainted Steel Coil,Self-Clean Ppgi Roofing,Self-Clean Steel Wall Panel
Shandong Wofeng New Material Co., Ltd. , https://www.wofengcoil.com