The heat transfer oil heating system has a wide range of popularization and use prospects in various industries. It has been used in wood-based panels, petrochemicals, textiles, chemical fiber, printing and dyeing, light industry, crude oil transportation, food, highway engineering, building materials and other industries.
The heat transfer oil heating system has a wide range of popularization and use prospects in various industries. It has been used in wood-based panels, petrochemicals, textiles, chemical fiber, printing and dyeing, light industry, crude oil transportation, food, highway engineering, building materials and other industries. Especially in the glass fiber products industry, the drying heat source is changed from steam-electric hybrid heating mode to burning heat-conducting oil-oil furnace, and the economic benefits are remarkable. If the technology is promoted in glass fiber and other industries, it will create higher value for the country.
However, after a stage of operation, the heat transfer oil furnace heating system often produces a decrease in the efficiency of heat transfer. The fundamental reason is that the heat transfer oil starts to coke in the transfer pipe. This not only affects the quality of the heat transfer oil, but also poses a hazard to the safe operation of the entire conveyor system and hot oil boiler. To this end, Shandong Kaidi Chemical has continuously summed up its experience and developed a cleaning agent product suitable for heat-conductive oil furnace cleaning during the cleaning process of the heating oil furnace heating system for many years.
In 2012, the third generation of new heat-conducting oil furnace cleaning agent series carefully developed and improved by Shandong Kaidi Chemical was introduced into the market and won the recognition of customers. Compared with the previous two generations of heat-conducting oil cleaning agents, the third-generation heat-conducting oil cleaning agent series is available in a wide range of products to meet the cleaning process under different operating conditions. Including water-soluble KD-L312 heat-conducting oil cleaning agent, solvent-based KD-L212 heat-conducting oil-carbon cleaning agent, oily KD-L802 heat-conducting oil online cleaning agent and oily KD-L801 heat-conducting oil heat transfer net, a total of four heat-conducting oil cleaning agents product. The third generation of heat-conducting oil cleaning agent series products are suitable for all kinds of heat exchangers, boilers, pipelines and other chemical equipments with heat-conducting oil as heat transfer medium. The cleaning effect is good, the oil coke is fast, and the cost is low. It is a real energy-saving type. Environmentally friendly products.
Kaidi thermal oil cleaning agent for a range of applications:
1. It is used to clean the heat transfer oil furnace widely used in various industries (petroleum, chemical, textile, printing and dyeing, chemical fiber, plastics, building materials, heating) or heat exchange equipment with heat transfer oil as working medium.
2. Used to clean heavy grease, oil coke and sludge in the heat transfer oil system.
Features of Kaidi Thermal Oil Cleaning Agent:
1. Green and environmental protection: This product is a new generation of environmentally friendly products that do not contain phosphate or sodium nitrite.
2, safe and non-combustible: This product is a water-based product, safe to store and use.
3. Anti-rust during the period: The anti-rust performance of this product on cast iron is ≤1, which fully meets the anti-rust requirements between processes.
According to different construction processes, there are specific requirements for the use of heat-conducting oil cleaning agents. For details, please call the Technical Center of Shandong Kaidi Chemical Industry Cleaning Division to request cleaning solutions and quotations. The manufacturer supplies directly to the customer's factory, focusing on industrial chemical cleaning for ten years, and the product quality and technical strength are 100% guaranteed!
Http://news.chinawj.com.cn
Submission:
Features
1.The structure has good rigidity, high transmission precision, bilateral drive and smooth operation..
2.Automatic compensation, positioning, breakpoint continuous cutting, recovery function is complete.
3.Automatic FASTCAM graphic programming software, simple nesting.
4.Flame / plasma dual NC cutting system, easy to operate.
The Heavy dragon flame plasma Cnc Cutting Machine series is a stereotyped product carefully developed by our company. It is a numerical control equipment for metal sheet blanking. It not only has an appearance atmosphere, but also has stable operation, high work efficiency and long service life. It can realize various metal materials. Cut by any pattern. The cut face after cutting does not need to be surface-processed under normal circumstances, and has the advantages of high automation, convenient.
The production line of automobile engine and body stamping parts has the characteristics of continuous, high efficiency and high reliability. The automotive industry requires special research on the process characteristics of Automobile Parts, and exchanges with the automobile industry to develop a modular and serialized flexible production. line. The flexible production line is processed by the processing parts of the automobile engine cylinder head, cylinder head, crankshaft, connecting rod, camshaft and box body. The module that can adapt to the mixed production can be reorganized and reorganized into the production line to grasp the function evaluation and error traceability. Quality control and governance integration technology to develop high-speed precision, reliable CNC Cutting Machine, high-speed reclaiming, auxiliary equipment such as deburring function.Automobile Production Cutting Machine
Metal Laser Cutter,Automobile Production Laser Cutting Machine,Automobile Cutting Machine,Automobile Production Cutting Machine
Buluoer Intelligent Technology Co., Ltd. , http://www.buluoercuttingmachine.com