Nowadays, more and more wallpapers have been welcomed by people who advocate environmentally friendly decoration. PVC wallpaper is a popular wallpaper in modern wallpaper decoration. It is made of a high molecular polymer and is mainly made of polyvinyl chloride resin. So, what are the characteristics of PVC wallpaper? How to paste PVC wallpaper? What are the construction requirements?
PVC wallpaper features
PVC wallpaper is made of a layer of polyvinyl chloride film on the bottom layer of pure paper (or non-woven fabric, woven fabric), which is made by compounding, embossing and printing. This type of wallpaper has a fine print, good embossed texture, good waterproof and moisture resistance, durable and easy to maintain. This kind of wallpaper is the most commonly used and most widely used wallpaper, and can be widely used in all home and business places.
Pvc is plastic, the main component is polyvinyl chloride, bright color, corrosion resistance, strong and durable, due to the addition of plasticizers, anti-aging agents and other toxic auxiliary materials in the manufacturing process to enhance its heat resistance, toughness, ductility Etc., so its products generally do not store food and medicine.
There is no such problem for PVC wallpaper. Many people have doubts. In fact, many environmentally friendly wallpapers have more or no toxins, but PVC wallpapers have no harmful substances and will not cause harm to the human body. Because he used very environmentally friendly materials, some people have compared the composition of PVC wallpaper and baby pacifiers and found that wallpaper is more environmentally friendly than baby pacifiers, so good PVC wallpaper is not poisonous, but everyone Be sure to pay attention to the purchase of certified PVC wallpaper when purchasing.
PVC wallpaper construction requirements
1. The bottom layer of the wall surface treatment should be smooth and smooth, and the yin and yang angle lines are smooth and straight, without cracks, chipping angles, no blisters and pitting. After the wall is treated well, the nitro or alkyd varnish should be brushed once to prevent the wall from being floured. The brush varnish should be thin and even, not thick.
2, the glue uses the supporting environmental protection special glue, the viscosity is very strong, one kilogram of glue can be attached 7m2. Domestic high-quality wallpaper rubber powder, can add a small amount of white latex.
3. The glue is applied to the wall surface, and the glue is applied to the back of the wallpaper and left to stand for 1 minute. The cloth layer is thin and uniform, and the width of the cloth is always 2.5 times the width of the wallpaper. The thickness is moderate and uniform.
4, the construction features of the posting method dry paste method, the wallpaper does not need to pass water. Docking, flowering, rigorous, or lap joint construction, do not squeeze the glue out of the seam.
5, pay attention to the use of soft plastic scraper, push the care to be careful, do not squeeze the glue to the wallpaper surface or scraper, if you accidentally squeeze the glue, please immediately remove it with a clean wringed wet towel, always keep The wet towel is clean and hygienic.
Stamped Parts are a non-standard stamped fasteners . The raw material is carbon steel or stainless steel.
Consider they are Non standard stamped parts,they need make customized by customers drawings and samples.
Besides the standard size ,we can also make it specially according to your drawing or design.
Free samples can be sent for your test the quality and small order can be accepted.
Hebei Xinyu Metal Products Co.,Ltd is a ISO9001 cerificated enterprise,which specialize in
manufacturing and exporting Furniture Nuts .Product including
Wing Nuts , Hopper Feed T Nuts , Propeller Nuts , Weld Nuts , Pallet Nuts , Locking Nuts , Rivet Nuts , Doggie Tooth Washers , Steel Stamped Parts , Hopper Feed Rivet T Nuts , Metal Stamped Parts ,
T-Nuts For Cliff-Climbing,Furniture Nuts, Tee Nut For Rock Climbing holding, Insert Tee Nut ,Middle steel Zinc Plated Stamping Wing Nut, Auto Flat Plane Weld Nuts ,
Automobile Spot Welding Nut,Customer-Made Metal Stamping Parts, Cold Heading Tee Nuts ,Stainless Steel Butterfly Nuts, Furniture Eccentric Wheel , Cam Lock Furniture Nut .
Our key strength are custom made special fasteners according to drawing or sample .We have longer and stable business relationship with well-known companies from American, Poland,Germany,French and so on.In the future ,xinyu will continue focusing on innovation special designed products,becoming your most trusted partner.
Steel Stamped Parts
Steel Stamped Parts,Stamped Parts,Precision Stamped Parts,Custom Stamped Parts
Hebei Xinyu Metal Products Co.,Ltd , https://www.t-nuts.net