As the weather turns cold, the bathroom bath temperature is gradually increased. It is the time when the shower glass is most prone to self-explosion. Why does the shower glass blew? How to prevent self-explosion? Security issues such as this are definitely a concern for many people. of. Today, with Xiao Bian together to understand why the glass shower room blew it.
Reasons why the shower glass blew
1. In order to achieve the wet and dry zoning effect of the bathroom, we chose the shower room product because of its specific working environment. For the sake of safety, the shower room must use qualified high-temperature tempered glass. This has strict regulations in the national standard. QB 2584-2007 ;
2. Although toughened glass is the safest kind of safety glass, the glass contains nickel sulphide impurities in the process of high-temperature tempering. It originally existed in a small crystal state. Under normal circumstances, it will not cause glass damage, but The reheating of the tempered glass changes the phase state of the nickel sulphide impurities. The high-temperature α state of the nickel sulphide is frozen when the glass is quenched. It may take many years for them to recover to the β state. The low-temperature β state of the nickel sulphide impurity will produce a volume. When it increases, local stress concentration occurs inside the glass, and the self-detonation of the tempered glass will occur. However, most of these bleeds will be completed within the shortest period of time after the tempering of glass is completed. At present, the self-exploding rate of tempered glass, which is generally recognized by the glass industry, is three-thousandths. The concept of this probability plus time is quite low; so tempered glass is still very safe.
3. The presence of impurities or bubbles in the tempered glass can also cause the glass to blew, so the glass selection also needs to be strictly controlled.
4. If you are concerned about the potential safety hazard of glass self-explosion, you can choose to add explosion-proof film on the glass or use laminated glass. This will be more secure and reliable.
Glass shower room use matters needing attention
First, reduce the damage simply by adding explosion-proof membrane
Due to the inherent characteristics of tempered glass self-explosion, this possibility cannot be ruled out theoretically. Even if high-quality tempered glass is selected, the harm to the human body is limited to the extremely light damage on the skin surface, but consumers are still advised to choose a layer of explosion-proof membrane, or Choose a shower room made of new explosion-proof laminated glass so that the damage to the human body can be minimized. For bathroom glass doors that may burst, an explosion-proof membrane is attached to the glass door to increase the strength. Even if the glass is exploded, it will stick to the film to prevent the glass from splattering.
Second, slowly raise the temperature when showering
And because the interior of the glass shower room is a relatively closed space, especially when the bath temperature is high, high temperatures and high pressures accumulate to a certain degree, which will put pressure on the glass screen, resulting in uneven heating of the glass. If the quality of the glass is not good, then With the large temperature difference in winter, it is easy to cause glass burst. Therefore, it is recommended that you gradually increase the water temperature while bathing, and do not suddenly use the water with excessive temperature.
Third, to avoid a fierce collision with the bathroom glass
Although the strength of the tempered glass is high, but also afraid of sharp things and violent impact, so we must slowly open the slow off, to avoid collisions. If you accidentally touch the glass during use, maintenance is also required to ensure safety.
Precautions when cleaning glass shower room
1, usually pay attention to cleaning with water, a period of time with a glass cleaner to clean once, and then wipe it clean with a dry rag. This will keep the shower room clean. (Note: Do not use cleaning agents to clean the hardware gadgets)
2. If there is yellow water stain and scale on the glass, we can use the glass cleaner to clean the yellow water stain. If the scale is dirty, use a neutral detergent. (Note: Do not use acidic or alkaline solvents for cleaning.
3, water stains above the bath room can go to the supermarket to buy a glass scraper with your glass size is about to clean up (Note: glass scraping is not greater than the glass on the glass room Oh, or it will be very inconvenient).
4. The water strip should be taken down for cleaning.
5, in the process of cleaning the shower room, do not use metal objects to collision. Easily cause self-explosion.
Summary: The above is a small series of glass shower room for everyone to introduce some knowledge of self-explosion, partners in the purchase of glass material and cleaning should pay special attention, do not plant a time bomb on their side, oh, more information, please pay attention to this website.
Plastic Shower Room Glass Automatic Door Glass Wardrobe Door Shower Room Shower Bathtub Change Shower Room
R600A is refrigerant grade Isobutane, a natural, or "not in kind", refrigerant suitable for use in a range of refrigeration applications. The use of R600a is increasing due to its low environmental impact and excellent thermodynamic performance and it is now the refrigerant gas of choice in domestic and small commercial refrigerators. It is non-toxic with zero ODP (Ozone Depletion Potential) and very low GWP (Global Warming Potential).
R600A Refrigerant Gas,R600A Refrigerant Pice,R600A Refrigerant Replacement,Flammable Refrigerants R290 R600A
ZHEJIANG ZHONGLAN REFRIGERATION TECHNOLOGY CO.,LTD , https://www.uiszl.com