The most complete range of floor paints in the history of floor paint

Floor paint is a floor coating used for interior floor finishes in buildings. Many of our solid wood flooring materials are porous organic materials. When they are in direct contact with air, they may be contaminated by dust, dirt, grease, glue and chemicals. It is not enough to have a beautiful floor in a comfortable life. It is necessary to have a good floor paint for maintenance. The floor paint finish is widely used because of its low cost, light weight, convenient maintenance and good integrity. There are many types of floor paints on the market. Let's take a look at the types of floor paints. You can choose the floor paints in the future.

Type of floor paint - by purpose

(1) Ordinary floor paint. At present, polyurethane floor paint has been widely used, the film is bright and full, wear-resistant, water-resistant, oil-resistant, alkali-resistant, and uv-cured coating suitable for production line.

(2) Cement floor paint. A coating used to finish the cement floor and improve the function of the concrete floor. Cheap products are vinyl chloride or styrene tar cement floor paint and polyvinyl butyral cement floor paint.

(3) Seamless floor paint. It is prepared from synthetic resin, pigment and filler. Synthetic resins commonly used at present are polyvinyl acetate (emulsion), polyvinyl formal (aqueous solution), polyurethane (two-component), epoxy (solvent-free) and the like.

(4) Polyurethane elastic floor paint. It consists of two-component room temperature curing polyurethane coating. During construction, the components A and B must be mixed in a certain proportion.

(5) Antistatic floor paint. Usually made of polyurethane resin or epoxy resin, with special conductive materials and pigments, curing agents and other components.

(6) Anti-corrosion floor paint. Usually, an unsaturated resin or a vinyl ester is used as a base, and a promoter and a curing agent are blended.

Type of floor paint - by material

(1) PU coating is the most commonly used paint variety in domestic enterprises. It has better comprehensive performance, such as: good flag work performance, filling must, fullness, hardness, grinding, etc. have better performance. PU coatings are the most widely used and the most widely used in wood door painting. Huilong Coating is one of the best.

(2) The most commonly used PE coating is PE primer, which is divided into transparent primer and solid color primer. As a kind of high solids coating, PE coating has high hardness, good fullness, strong transparency and outstanding resistance to sagging. It is a very distinctive coating variety. At the same time, it also has its own shortcomings: such as high construction requirements (especially when the paint is blended), brittleness, and difficulty in sanding.

(3) NC coating is a very old paint type, and it is also a widely used variety. Its application at the point mainly includes: transparent lacquer, solid nitrocellulose lacquer. In the domestic nitrocellulose paint, mainly in the antique style of painting, divided into "open, semi-open" painting effect.

(4) UV coating is one of the two most environmentally friendly coatings recognized in the world (the other is water-based coating). As a new coating variety, UV coating has developed rapidly in China in the past decade. Especially in the Pearl River Delta region, the Yangtze River Delta region, the furniture factory, the floor factory, the wooden door factory are used very much. This is a new type of coating with great expansion, and the matching technology, equipment and technology are also coming. The more mature.

(5) Water-based paint, its environmental protection is the same as UV paint, it is one of the most popular coatings. Waterborne coatings are the fastest growing coating of all coatings. At present, the common water-based coatings are not too high in solid content, thinner in paint film, less in hardness, and slightly less resistant to water than other coatings. However, with the continuous advancement and development of coating technology, these limitations are being improved.

Floor paint is a wood lacquer specially used for wood flooring, especially solid wood flooring. Because the material is soft, it requires a higher hardness and wear resistance paint to achieve the protection effect. Floor paint can be divided into high light, matte and semi-matte according to the gloss, which can be selected according to the needs when purchasing.

[Follow the WeChat public number "Jiuzheng Paint Network"; pay attention to surprises, scan code to view "If your husband is selling paint..." Jiuzheng Coating Network Exchange Group]

We are involved in offering high-quality Cnc Plasma Cutting Machine to our valuable customers. These products are made from high-quality components.Our company are prominent manufacturers and exporters of high-quality Auto Duct Forming and Cut to Length Machines. Offered products range consists of Auto Duct Forming Machine, Cut to Length Machine and Roll Former Machine. All offered products are manufactured under the direction of experts using quality tested material and latest technology as per industry norms. Sturdy designs, fine finish, high strength, long service life and damage resistance are features of our offered range of products.

Gantry Double Plasma Cnc Cutting Machine is a stereotyped product carefully developed by our company. It has high processing efficiency and is 2.2 times of single gun cutting. It is a numerical control equipment for metal sheet blanking. It not only has an appearance atmosphere, but also has stable operation, high work efficiency and long service life. It can realize cutting of any metal material according to any pattern. It is widely used in the cutting of sheet metal in various mechanical manufacture industry.

Gantry Double Plasma CNC Cutting Machine

Cnc Plasma Cutting Machine,Cnc Full Mato Cutting Machine,Gantry Double Plasma Cnc Cutting Machine,Double Plasma Cnc Cutting Machine

Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com