The Spray booth is a device that paints and dries the surface of the equipment. It not only protects the equipment but also protects the items. Want to know more about the spray paint room ? Want to know what kind of spray paint room is there? And what are the factors in measuring the spray paint room? Next, follow the decoration home network Xiaobian to learn about the relevant content!
First, the classification of baking room
1. Cross-flow paint booth. Airflow flows from one end of the room to the other. This type of machine is low in cost and easy to install. The disadvantage is that the mist moves along the side of the body, and the mist cannot be removed from the operator's face, and the working environment is not satisfactory. The indoor paint temperature is not balanced. Affect the quality.
2, side under the paint room. The air enters the paint booth through the filter unit of the ceiling and is discharged from the side wall of the room. This is a mid-range price paint booth. Since the mist is far from the vehicle body and the mist can be removed from the operator's surroundings, the paint effect and working environment are ideal.
3, all under the paint room. It reflects the most advanced technology available today. Air enters the ceiling and is discharged to the outside through a pit or basement. This venting method results in a cleaner painting process and a safe working environment. However, its cost is high and it takes up a lot of space.
4, paint mist treatment. Can be divided into dry paint room and wet paint room (water treatment) two categories.
Second, several factors to measure the paint room
1. Brightness, the brightness of the paint room needs to reach 800-1000 lux, and the light of the near D65 light source needs to be used, and the wall inside the room should be matte white;
2, air flow;
3, the filter effect, this depends on the model of the paint roof cotton, the general repair shop uses two models of EU5 and EU6, you can use the sun light in the room when using the paint room, usually very fine dust per square meter Should be less than 5;
4, the wall sealing effect, the paint room must be sealed, and there should be no accumulation of paint dust at the joint;
5, to ensure positive pressure, the amount of air in the paint room should be slightly larger than the amount of air, so that the paint room is kept under positive pressure;
6. The sealing effect of the heating system should be well sealed around the burner and the chimney, and the putty after burning should not appear;
7. The heating rate is about l0~15min when the paint room is raised from 20°C to 60°C. At the same time, it should be noted that some thermometers in the paint room are not allowed. When measuring the temperature, the temperature of the metal body in the paint room shall prevail. If the selected paint booth can meet the above conditions, it is an ideal paint booth. However, in the course of overwhelming use, there will be many situations such as poor quality of the paint booth, more dust in the room, poor construction effect, and poor lighting effect.
The above is a detailed answer to the Xiaobian, I don't know if you are satisfied with the introduction of the decoration home network Xiaobian~ If you want to know more about the exciting content, please continue to pay attention to our decoration encyclopedia!
Small Automatic Door Opener,Automatic Patio Door Opener,Automatic Gate Door Opener,Electric Door Operator
Caesar door control co.,ltd , https://www.caesar-door.com