Many users will experience excessive ping delay and packet loss after the wireless bridge is installed. How do we solve this problem and how do we handle it? Here's a brief introduction:
1, replace the test terminal comparison test.
2. Step-by-step ping packet testing. Decompose the entire test into test terminals to base stations, base stations to gateways, and gateways to external networks. Perform step-by-step ping tests to analyze the causes of faults and resolve faults.
3. The delay of the ping packet from the test terminal to the base station side is too large, and packet loss attempts to adjust the base station channel, transmit power, and installation angle.
4. When the ping packet delay from the base station to the gateway is too large, packets are dropped and the link from the base station to the gateway is checked. The long network cable from the POE to the base station and the short network cable from the POE to the switch are not investigated, and individual fiber link faults are not ruled out.
5. The ping packet on the gateway-to-external network side is too late. Packet loss needs to be reported to the network operator for assistance.
Contact: Miss Xi
Contact information
596151684
The article comes from Levin technology wireless bridge transmission equipment. . Com, please indicate, thank you!
Stainless Wire Mesh
Stainless Wire Mesh,Stainless Steel Wire Mesh,Stainless Tray Wire Mesh,Stainless Steel Wire Rope Mesh
Anping Deming Metal Net Co.,Ltd , https://www.wovenfence.nl