1. Requirements for indoor temperature Indoor temperature during winter heating should be controlled at no less than 18°C, and the average indoor temperature should reach 16°C. However, for the elderly and children, the standard of 16°C is relatively low, but it should not be too high. High, too high will make people feel uncomfortable, and the temperature difference between indoor and outdoor is too easy to cause colds and other diseases.
2. Leakage treatment If there is water leakage in the pipe connection during the heating period, no matter the size is not self-solving, the professional maintenance personnel shall be promptly notified to perform the decompression and repair after the leakage point. It is absolutely impossible to carry out pressure maintenance and this will increase leakage. Damaged fittings.
3. The reason for the lack of heat is that it is not hot as a whole. It may be because the outdoor water inlet valve and the return valve are not open. The single-family home is not hot and may be caused by the lack of deflation on the top floor. The radiator is semi-hot and semi-cool, which is caused by the polygas of the tail. In short, under the condition of ensuring circulating pressure and temperature, the main cause of non-heat is gas plugging, and the deflation can be solved.
4. It is not allowed to transform the heating pipeline privately. Because the pipeline has a certain gradient when the pipeline network is installed, so that the air in the pipeline can be accumulated on the top and discharged in time, the unauthorized transformation may cause the slope to go wrong, resulting in partial gas blocking and not being able to be discharged. Will affect themselves, but also affect the entire unit of households.
5. Decoration radiator decoration radiator should take into account the maintenance, open area should be the entire group of radiators can be disassembled and removed is appropriate. The decorative parts shall be of the movable type. When there is a problem with the radiator, it can be easily lifted out to expose the entire pipe and the gas sheet. The openings of the riser and branch pipe valves shall have detachable and replaceable valve space.
Insulated Glass is made of two or more pieces of glass with effective support and evenly spaced and sealed at the periphery to form a dry gas space between the glass interlayers. The interlayer of the insulated glass is initially dry air, and other gases with a lower thermal conductivity than air are currently used. The minimum thickness of the gas interlayer of the Insulating Glass should not be less than 6mm, otherwise it will not function as thermal insulation. However, the thickness should not be too large, if it is too large to make the insulated glass too thick. In order to standardize the production of the frame, the gaps of the insulated glass are currently divided into 6, 9, and 12, 14, and 16 mm.
Low E Insulated Glass,Low Emissivity Glass,Double Glazed Window Units,Low-E Insulating Glass
Jinan Coton Glass Co., Ltd , https://www.cotonglass.com