Warming in the north is very common, and every family must install floor heating. The floor heating can heat the entire floor, allowing the room to increase in temperature, making people feel cold. Everyone knows that no product or thing can be perfect, it has advantages and disadvantages, and the same goes for warmth. What are the advantages and disadvantages of warmth? What are the precautions for warm installation? Let's take a look with Xiaobian!
The advantages and disadvantages of floor heating
First, the advantages
1. Health and comfort: The floor heating can provide heat, so that the ground temperature inside the house is even. As the saying goes, “warm people warm the feet firstâ€, and the scientific heating equipment for warming gives people a comfortable feeling of cooling their feet, and can also improve people’s comfort. blood circulation. And there will be no pollution caused by the convection of air, which will make the air in the house clean.
2. Space-saving: There is no heating radiator to increase the use of the area, can make the room both beautiful and tidy.
3. Power saving: The heating method of floor heating is high in efficiency, and the loss of transmitted heat is small, which is 20% more than other heating equipments, which is 20% of the running cost.
4, good thermal stability: the floor and floor heating aluminum foil layer of large energy storage, thermal stability can be good, although it is intermittent in time to maintain the stability of the indoor temperature.
5. Long service life: The service life of qualified floor heating pipe is more than 40 years.
Second, the disadvantages of the floor heating
1. There is a dead space in the use of space: The heating pipes for heating are very complex, and the use of smaller spaces is limited because the laying of coils is to be waterproof. It is difficult to reach heating standards in a small room temperature room.
2. After the floor heating is used for 2 to 4 years, the pipeline is prone to scale, which requires professional and professional equipment to clean it. If the scale is not treated, it will affect the heating effect.
3, there is occupation of the floor height, warm insulation board has 30mm, filling layer has 50mm, a total of 80mm thick, has an impact on the floor height.
Warm installation precautions
1. Install the floor heating must have professional knowledge of construction workers.
2. The sealing of the floor heating system should be checked before installation.
3, installation of floor heating must be dry, indoor temperature should not be too large, before and after the ambient humidity should be about 60 degrees better.
4. It is prohibited to use nails before and after construction to prevent the heating coil from being damaged.
5, in order to cut off the moisture, so that moisture can be released from the skirting board, in the laying of laminate flooring, should be laid before the composite film.
6, can not lay keel, will affect the cooling effect, and may also damage the pipe.
7. Use a thicker baseboard than the floor and allow enough expansion joints between the floor and the wall.
8, floor heating must be installed 24 hours before heating.
Xiao Bian summary: The above is about the advantages and disadvantages of the floor heating and the relevant content of the floor heating installation notes. We also understand the advantages and disadvantages of the floor heating and installation precautions. We hope to be helpful to everyone and want to learn more about the relevant content. Website information.
The advantages and disadvantages of floor heating
Aluminum Casting Motorcycle Parts
Aluminum Casting Motorcycle Parts,Aluminum Motorcycle Parts,Motor Engine Parts,Motorcycle Spare Parts
NINGBO AIKEHAN METAL PRODUCT CO.,LTD , http://www.diecastingsupplier.com