Hard copper bar power supply conductive connector, silver plated processing


1. Ensure the copper content of 99.9% or more, and the raw material is T2 copper. You can issue a copper foil raw material test report and our copper foil soft connection finished copper content test (using a spectrum analyzer) test report. Many companies on the market replace T2 copper with T3 copper or even worse copper, causing a series of problems such as excessive temperature rise and reduced lifespan.

2. The copper foil raw material is bent 150 times without breaking;

3. We can issue the actual temperature rise data report of our company;

4. Environmental protection tin plating and standard thickness tin plating can provide electroplating test report; 99.99% purity tin plating material is used for standardized thickness test;

5. High-quality insulation sleeve guarantee, our soft connection uses special customized high-quality insulation sleeve, made of pure plastic, without adding calcium powder, to ensure the performance and life of the insulation layer;

6. Precise punching greatly reduces burrs and increases the full contact between copper and conductor, which greatly promotes the control of temperature rise;

7. Standardized packaging, each product is wrapped with film and fixed with foam;

China Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business NetworkChina Hardware Business Network

================================================== ================================================== ======
'Hard copper bar power supply conductive connector, silver plated processing

The XUNDA Mechanical Protection Tape is a cold applied tape used for the corrosion protection and mechanical protection of oil ,gas ,and water underground or overhead steel pipeline.

It is a polyethylene film with a bonding butyl rubber adhesive ,the adhesive assures a complete bond and eliminates the need for tie-downs on the outerwrap.

The Mechanical Protection Tape shall be applied after the inner pipe anti-corrosion tape by hand or with a pipe wrapping machine. 

The composition of the Mechanical Protection Tape consists of two layers, butyl rubber adhesive layer and film backing.

Adhesive : Butyl rubber

Film Backing: Special blend of stabilized polyethylene

Mechanical Protection Tape

Protection Tape,Mechanical Protection Tape,Pipe Mechanical Protection Tape,Corrosion Protection Tape

Jining xunda pipe coating materials co., ltd. , https://www.pipeanticorrosion.com