Process equipment full pneumatic filling machine full pneumatic filling machine 1. Suitable for filling of paste food, it is placed between the container of food packaging machine forming and sealing. It is proved by the user that it works well and the goods are used accurately. Now, the introduction is as follows.
1 working principle and structure swinging cylinder 17 action, can drive the driving gear 24 to reverse the core 23, the transmission of the driven gear 2 so that the two cores 23 in the storage state 2, the material into 20 holes. Then the cylinder 7 total 4 hopper 2 passive gear 3 ram 4 cylinder 5 end flange 6 fastening 嫘 mother 7 cylinder 8 piston 9 嫘 female travel switch struts 12 reverse screw 13 feet 14 live struts 15 nozzle 16 series of nails 17 swing cylinder 18 fastening nut 19 to adjust the top wire, cover □ Wang Guojian into a negative pressure. The material is filled and stored. The cylinder to be oscillated 17 is reversely operated, so that the core 23 is rotated 90 and the other core is reversed 9 to be in a state of being injected. Then, the piston rod of the cylinder 7 drives the cylinder piston 8 forward to push the material out. A total of 4 from the nozzle 15 were injected into the container. The inner diameter of the cylinder +40180 is called the injection volume of 2263. If you need to choose a small capacity, you can replace the short cylinder.
In order to ensure the accurate measurement of the injection volume, the top wire 19 is finely adjusted, and the piston stroke of the cylinder 7 is changed, so that the volume of the volume of the material tank can be changed accordingly.
22 material cylinder 4 piston 8 nut 9 and so on, manufacturing village materials are. 13.
The nozzle 15 is connected to the valve plate 22 by a mesh 122; 1.5 is screwed, and the frame 21 is connected to the two struts as a fixed support. 14 is a living support. The reverse screw 12 can be adjusted to the height.
2 The pneumatic circuit core is turned to the storage position, and the cylinder 7 piston is retracted and is also in the storage position. When the vacuum blister food packaging machine equipped therewith is in motion, when the molding container is transferred to the sealing position and stopped, the collision block of the conveying mechanism collides with the fixed travel switch. The normally open contact is closed; the circuit is turned on, the 0 â–¡ 1 electromagnet is electrically connected, the reversing valve 1 reversing the air path, and the oscillating cylinder is reversely actuated. The two cores are turned to the injection position, and the ram 3 of the driven gear 2 is pressed against the stroke, so that the normally open contact closes the electromagnet to the electric suction reversing valve to reversing the air path. The pistons of the four cylinders 7 are advanced, and the stock in the cylinder is poured into the molding container. The one-way throttle valve is used to regulate the speed of the shot. Prevent speed from splashing too fast.
When the packaging mechanism of the packaging machine retreats, the stroke switch is reset, the electromagnet 0 is de-energized, and the reversing valve 1 is restored. The swing cylinder drives the core back to the stock position. When the ram 3 on the driven gear 2 is disengaged, the stroke switch 10 is restored. The electromagnet, 12 is de-energized, the reversing valve is reset to the storage position 5 and the next action cycle is restarted.
Edit Yuehua Postcode 245000 Received Date 1999 Month
Titanium Wires,Titanium Alloy Wires,Titanium Coil Wire,Titanium Resistance Wire
Baoji Yongshengtai Titanium Industry Co., Ltd. , https://www.bjystititanium.com