Hydraulic lift vane pump inspection tips

The hydraulic system of the hydraulic lift is the heart of the entire equipment. Once a problem arises, the equipment will become paralyzed. The hydraulic lift vane pump is an important part of the hydraulic system. Therefore, it is necessary to do a good job of maintenance and to learn simple self-repair in daily life. Below, Jinan Wenyi Hydraulic Lifting Machinery Co., Ltd. teaches you a few tips.

1 Dust removal work should be done to prevent impurities from entering the hydraulic system of the hydraulic lift.

2 If it is found that oil is leaking or air is sucked in, the new oil of the same brand should be processed and replenished in time.

3 Regularly change the hydraulic oil of the hydraulic lift, depending on the operating conditions and the results of the oil check test. In general, it can be replaced once a year.

4 Hydraulic lifts are often cleaned in accordance with the maintenance regulations to keep the fluid in circulation.

5 It was found that the phenomenon of large noise and damage to the vane pump should be promptly overhauled and replaced.

Summary: There are many tips for the maintenance of the hydraulic lift vane pump. I hope that the above content will help everyone. If the problem has not been resolved, it should be promptly reported to the manufacturer so as to avoid delays and affect the working efficiency.

Office Furniture

Office Furniture,Computer Desk,Office Desk,Office Chairs

QINGDAO SANJET NEW POWER MACHINERY CO., LTD. , https://www.sanjet.net