Yangzhou Xinbo Electric Technology Co., Ltd. specializes in producing PULB-011 mining cable polyurethane cold glue, mining cable cold glue, mining rubber cable flame retardant cold glue, mining cable cold glue for polyurethane rubber It is a two-component reactive material and is one of the new varieties of special synthetic rubber. It is an ideal material for cold repair of mining cables.
PULB-01 mining cable polyurethane cold adhesive
I. Introduction: Telephone
Yangzhou Xinbo Electric Technology Co., Ltd. specializes in producing PULB-011 mining cable polyurethane cold glue, mining cable cold glue, mining rubber cable flame retardant cold glue, mining cable cold glue for polyurethane rubber It is a two-component reactive material and is one of the new varieties of special synthetic rubber. It is an ideal material for cold repair of mining cables. Product performance exceeded the similar products of American 3M Company in 1979. It is easy to use, simple to operate, safe and reliable, and has significant economic benefits.
Second, use: telephone
It is suitable for on-site repair of rubber and plastic cable sheathing layers of various specifications at home and abroad below 10KV, especially suitable for cold recovery of fully mechanized mining units. Mine rubber cable joints and repairs are the most ideal repair materials for coal mines with gas and coal dust explosion hazards. The operation process is simple, the curing time is short, it is not easy to aging, waterproof, anti-corrosion, flame retardant and so on.
Third, product performance
Tensile strength (MPa) ≥ 110
Bonding strength (N/mm) ≥ 5.0
Elongation at break (%) ≥ 260
Flame retardant GB12666.2 (qualified)
Hardness (Shore A) 80-90
Tear strength (N/mm) ≥ 5.0
Fourth, indicators:
Gel time (15-30 ° C) 6-8 minutes
Demolding time (15-30 ° C) 2-3 hours
Fully cured (13-30 ° C) for 24 hours
Fifth, the method of use:
When using, pour all the B components of the same specification into the A component can, stir for 2-3 minutes (not more than 5 minutes), stir evenly and then pour into the repairing mold.
Sixth, storage period:
This product needs to be sealed and stored to avoid contact with air to prevent chemical reaction. The storage temperature should be above 5 °C, placed in a cool, ventilated and dry place, avoid direct sunlight, no fireworks, and the storage period is two years.
My company's main products: mining cable flame retardant cold glue, mining cable flame retardant heat-filling tape, mining cable temperature control heat-filling machine, mining cable temperature control pressure machine, mining electric detonator tester, mining Cable fault comprehensive detector, mine stray cable tester, mine explosion-proof grounding resistance tester, mine 6KV-10KV wireless nuclear phase meter, mine insulated boots glove pressure tester, mine high-efficiency oil filter Use electrical testing equipment. Welcome to call or QQ consultation, telephone, QQ,
Friendly reminder: buy mineral products to buy direct manufacturers, product quality is guaranteed! ! ! phone
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Locomotive Industry Roll Forming Line
Roofing Machine,Locomotive Industry Roll Forming Line,Locomotive Industry Roll Forming Machine,Locomotive Industry Roll Making Line
Xinxiang Tianfeng Machinery Manufacture Co., Ltd. , https://www.tfrollforming.com