Level of resistance to damage
Class A1 safes can prevent the use of common hand tools, portable power tools and grinding heads, and the use of these tools in conjunction with each other, to open doors within 15 minutes of net working time or to create 38 square centimeters of through holes in cabinet doors and cabinets.
A2 safe can prevent the use of common hand tools, portable power tools and grinding heads and these tools used in conjunction with each other, can not invade the B1 class safe within 30 minutes of net working time can prevent the use of ordinary hand tools, portable power tools and grinding head As well as special portable power tools and cutting torches and these tools are used in conjunction with each other, they cannot invade within 15 minutes of net working time, or cause no more than 13 square centimeters of through holes in cabinet doors and cabinets.
The Class B2 safe can prevent the use of common hand tools, portable power tools and grinding heads, and dedicated portable power tools and torches, and the mutual use of these tools. It can not be invaded within 30 minutes of net working time, or on the doors or cabinets. Causes no more than 13 square centimeters of through holes.
The B3 safe can prevent the use of common hand tools, portable power tools and grinding heads, and special portable power tools and torches, as well as the mutual use of these tools. It cannot be invaded within 60 minutes of net working time, or on doors or cabinets. Causes no more than 13 square centimeters of through holes.
The Class C safe can prevent the use of common hand tools, portable power tools and grinding heads as well as special portable power tools and torches and explosives, as well as the use of these tools and materials. It can not be invaded within 60 minutes of net working time, or in the cabinet. Holes of no more than 13 square centimeters are created on the door and cabinet.
The security level of an anti-theft safe can be seen from its product model, for example: FDG-A1/D-53, where A1 represents its security level.
At present, most of the anti-theft safes on the market are A1 types. There are various shapes and styles of products. Consumers can purchase according to their needs. Regardless of the type of anti-theft safe products purchased, consumers should pay attention to the following aspects: :
1 The color of the exterior paint film (or spray film) of the anti-theft safe cabinet shall be uniform and uniform, and there shall be no obvious defects such as cracks, gowns, and spots.
2 Anti-theft safes with cabinet height ≤ 600 mm. The upper, right and left clearances of the cabinet door and door frame are ≤ 1.5 mm, and the lower clearance is ≤ 2 mm. The gap is too low to reduce the anti-theft performance.
When the quality of Type 3A and Type B anti-theft safe cabinets is less than 340 kg, instructions for fixing holes, fittings, and instructions shall be installed, and attention shall be paid and fixed in time according to the instructions.
4 anti-theft safes General door thickness of 8-10 mm, cabinet thickness of 6 mm or more, so as to ensure anti-theft performance, purchase should ask the steel plate thickness.
ATP (NATIONAL STANDARD)
PRODUCT NAME: ATP Aluminum Dihydrogen Tripolyphosphate
PRODUCT TYPE: Anti-corrosion Pigment
PRODUCT APPEARANCE: White Powder
CHEMICAL CLASS:AlH2P3O10 · 2H2O
CAS No．: 13939-25-8
PRODUCT APPLICATION: Aluminum tripolyphosphate, as a new generation of white antirust pigment made by Xinsheng Chemical, is the ideal substitute of toxic antirust pigments containing lead or chrome. It turns out through practical applications and test results by over 100 well-known coating material producers or researching institutes at home and abroad since it came onto the market in 1986, that this product is superior to such antirust pigments as lead red, zinc chrome yellow and Zinc Phosphate in rust prevention and practicality.
Modified Aluminum Tripolyphosphate is suitable for production of water paint while Aluminum Tripolyphosphate is suitable for oil paint. ATP is used in high-temperature resistant paints, wear resistant brake pads and Wheel slices.
TECHNICAL DATA
|
Items |
Data |
|
Appearance |
White powder |
|
Moisture % |
≤1.5 |
|
Residueon sieve% 325-1250mesh |
≤0.5 |
|
PH % |
3-5 |
|
Oil absorption |
30±5 |
|
P2O5% |
60-70 |
|
Al2O3% |
20-30 |
|
Standard |
Q/84XS02-2004 |
STANDARD PACKAGING:25kg/bag, Plastic-lined and plastic-coated woven bags or Composite paper bags.
TRANSPORT AND STORAGE
Protect against weathering. Store in a dry place and avoid extreme fluctuations in temperature. Special conditions for opened packaging: Close bags after use to prevent the absorption of moisture and contamination.
SAFETY
The product is not classified as dangerous under the relevant EC directives and corresponding national regulations valid in the individual EU member states. It is not dangerous according to transport regulations. In countries outside the EU, compliance with the respective national legislation concerning the classification, packaging, labeling and transport of dangerous substances must be ensured.
The information contained in the safety data sheet should be observed.
This contains information on handing, product safety and ecology.
ATP(National Standard)
Mono Basic Aluminum Tripolyphosphate, Aluminum Dihydrogen Tripolyphosphate 13939-25-8
shijiazhuang city xinsheng chemical co.,ltd , http://www.xsphos.com