The details of the guide rail lifting platform in the debugging process

The DIN rail lifting platform is a kind of non-scissor lifting equipment whose height is as low as 20mm, and its heavy load and wide table are deeply favored by customers. Then, you know that the debugging work after installation is also a top priority. If debugging Bad, directly affect the later use.

1. Check whether all the wood or bolts used for transportation on the DIN rail lifting platform are completely removed;

2. The meshing clearance of the guide rail lifting platform gear and rack should be 0.2--0.3mm;

3, the gap between the guide wheel and the back of the rack should be 0.5mm;

4. The gap between each roller of the guide rail lifting platform and the standard section riser is 0.5mm;

5, all door switches should be flexible;

6, install the lift buffer spring.

Concluding remarks: The gantry lifting platform is only used for the transportation of goods. It is strictly forbidden to be on the person. The customer must strengthen the safety awareness and must not be careless.

Padlock, lock in the world is the oldest and largest family, it can be said from the padlock other locks are multiplied in this category, it is derived from the.

About the thick Brass Padlock

1:Brass whole body, cylinder, rain or shine, the guardian of the family safe.

2:Travel, not afraid of thieves locked.

Good Quality security padlocks European standards

beautiful lock body,High quality. Users may need to choose the characteristics of the copper-like locks. The lock only for domestic users welcome, but also into the international market and exported to Europe and the United States.

Full Tongsuo body
Durable high quality brass lock body
All copper cylinder
High strength wear-resistant and durable good accuracy does not rust

Brass Padlock High Quality Brass Padlock

Brass Padlock,Solid Brass Padlock,Antique Brass Padlock,Bag Brass Padlock

Shengping Safety Protection Locks Manufacturer , https://www.chinajiuzhou.com