Aluminum alloy windows and doors are known for their bright, oxidized surface and modern appearance. The large frame allows for a significant amount of glass to be incorporated, which enhances natural lighting inside the space and creates a strong visual contrast between the interior and exterior. This design not only improves the aesthetic appeal of the living area but also contributes to a more dynamic and spacious feel. Due to the ease of extrusion and high machining accuracy of aluminum profiles, these windows and doors are widely used in home renovations. Below is a detailed guide on the standard installation process for aluminum alloy doors and windows.
The installation process includes several key steps: line positioning, window draping installation, anti-corrosion treatment, window installation, fixation, gap treatment, and glass and hardware installation.
Line Positioning
(1) Based on the design drawings, measure the position, size, and elevation of the doors and windows. Mark the edges using the centerline of the window or door. In multi-story or high-rise buildings, the top and bottom window lines should be prioritized, and vertical lines should be drawn with a plumb bob or theodolite. Each floor should have marked lines, and any irregular edges should be chiseled out.
(2) The horizontal position should be measured using a +50cm level line from the indoor floor. Ensure the line is straight and consistent across all floors to maintain uniform window height.
Window Draping Installation
Install the draping according to the construction drawings, ensuring it is properly positioned and securely fastened.
Anti-Corrosion Treatment
(1) If the design specifies anti-corrosion treatment for the outer surface of the window frame, follow the instructions. Otherwise, apply an anti-corrosion coating or plastic film to prevent direct contact between cement mortar and the aluminum surface, which can cause electrochemical corrosion.
(2) When using iron parts for fixing, prefer stainless steel components to avoid rust and corrosion. If non-stainless materials are used, ensure they are treated to prevent electrochemical reactions.
Installation of Aluminum Alloy Doors and Windows
Place the aluminum window frame according to the pre-marked lines. Adjust the horizontal, vertical, and diagonal dimensions to meet quality standards, then temporarily fix it with wooden wedges.
Fixation of Aluminum Alloy Doors and Windows
(1) If the wall has pre-embedded iron parts, weld the window’s iron feet directly to them and apply rust protection at the welding points.
(2) For walls without embedded iron, use metal or plastic expansion bolts to secure the window frames.
(3) In cases where no embedded iron exists, drill a 6mm diameter hole 80mm deep into the wall. Insert a 6mm steel bar coated with 108 cement slurry, and once set, weld the window’s iron feet to the steel bar.
Treatment of Gaps Between Window Frame and Wall
(1) After installation and fixation, conduct a hidden works inspection. If approved, treat the gaps between the window frame and the wall as per the design specifications.
(2) If no specific design is given, fill the gaps with elastic insulation material or glass wool strips, leaving a 5–8mm notch for sealing with caulk or sealant.
Installation of Window Sash and Glass
(1) Install the sash and glass after the wall surface around the opening is completed.
(2) Slide the window frame into its fixed position, place the glass sash into the groove, and adjust the gap accordingly.
(3) Assemble the swing doors by placing the glass into the frame, adjusting the gap, inserting the sealing strip, and applying sealant.
(4) For floor spring doors, install the door frame and ground spring first, then insert the glass into the frame, adjust the gap, and apply the sealing strip and sealant.
Corn head Gathering Drive Sprocket
Our Corn head Gathering Drive Sprocket is good in quality and competitive in price. We are manufacturer and supplier of Corn head Gathering Drive Sprocket following your specific requirement. We are looking forward to your E-mail and establishing cooperative relationship with you! We would provide professional Corn head Gathering Drive Sprocket with good services for you!
Corn Head Gathering Drive Sprocket, Gathering Drive Sprocket
NINGBO BORINE MACHINERY CO.,LTD , https://www.borine-agroparts.com